Setup For Failure Management; Setting Memory Dump (Debug Information) - NEC Express 5800 User Manual

4-2 Procedures after Completion of Installation

SETUP FOR FAILURE MANAGEMENT

Make the following settings beforehand to ensure quick recovery from failure.

Setting Memory Dump (Debug Information)

This section explains the setting for collecting memory dump (debug information) in the server.
IMPORTANT:
Notes on memory dump
The maintenance personnel designated by your sales agent are responsible for collecting
memory dump. Customers should make settings of memory dump only.
Sometimes a message indicating a shortage of virtual memory appears at the system startup,
when a failure has occurred after making settings described here and you have restarted the
system to save the memory dump. Continue the startup. If you restarting the system, you may not
be able to collect the memory dump accurately.
Take the following steps to set memory dump:
1.
From the [Start] menu , select [Control Panel] and then click [System].
The [System Properties] dialog box
appears.
2.
Click the [Advanced] tab.
3.
Click [Settings] in the [Setup and
Recovery] box.