NEC Express 5800 User Manual page 64

3-24 Windows Setup
31. After restarting, the following screen will appear and the installation will be continued. Do not
perform any operations. The Express5800/ft series software is installed automatically.
Express5800/ft series clear installation
** Please do not perform any operations.
** The system will restart automatically. **
*** Setting [ft series environment (Preparation)] ***
*** Setting [ft series environment (NECHWID)] ***
*** Setting [Timeout for non-communication time] ***
*** Installing [Stratus Big Board Driver] ***
*** Installing [IPMI] ***
*** Installing [PROSET II] ***
*** Installing [SRAPS] ***
*** Installing [mof file] ***
*** Installing [Stratus Debug Print Driver] ***
*** Installing [NEC ESMPRO Agent] ***
IMPORTANT:
closing the window, etc., the installation will be stopped. In such case, operations on Windows
will be possible, but modules or PCI boards will not be duplicated properly. If this happens,
you need to start over the ft series setup.
32. The following screen will appear and installation of NEC ESMPRO Agent will be started.
The NEC ESMPRO Agent install wizard starts up and installation is done automatically. Do not
perform any operations.
Never terminate the above program while it is running. If it is terminated by
**