NEC Express 5800 User Manual page 43

PCI modules
IMPORTANT:
Do not turn off the power before the "NEC" logo appears.
When powering on, make sure that the BMC status lamp (
are off and then press the power switch.
After a while, the "NEC" logo will appear on the screen.
While the "NEC" logo is displayed on the screen, NEC Express5800/ft series is performing a
power-on self test (POST) to check itself. For details, see the separate volume of User's Guide.
Upon the completion of POST, Windows will start.
If the server finds errors during POST, it will interrupt POST and display the error
CHECK:
message. See the separate volume of User's Guide.
BMC status lamp
CPU modules POWER switches*
* Only the lit POWER switch can be used.
Windows Setup 3-3
) on the both PCI modules