Setting The Clock - Fisher & Paykel OR90SDBSI Installation Instructions And User Manual

Buttons
sets the timer
sets the cooking time for automatic cooking
sets the stop time for automatic cooking
sets the clock, returns oven to manual mode,
cancels automatic cooking
decreases time and beep volume
increases time
Illuminated symbols
If the display shows
flashing with
0•00
A
U
steadily lit
T
flashing and
O
beeping
steadily lit
flashing and
beeping
To set the clock
When the power to the appliance is turned on or restored after a power failure, 0•00 and AUTO
will flash in the display.
1 Press .
2 Press and
It means that...
The clock needs to be set.
The oven is set for automatic
cooking.
Automatic cooking has finished
or has been set incorrectly (the
stop time is before the time of
day)
The timer is set
The time is up
until you have the correct time of the day.

Setting the clock

Fig. 16 Clock display and control buttons
Fore more information
See instructions below.
See section 'Automatic cooking'
See section 'Using the electronic timer'
15