Fisher & Paykel OR90SDBSI Installation Instructions And User Manual page 9

Locating the area for electrical connection
Area for electrical
connection
Fig. 2 Area for electrical connection
Fitting the adjustable feet
Important!
It is possible to install the cooker above a plinth without fitting the adjustable feet.
In that case the cooker will stand directly above the plint; make sure you provide safety measures to
keep it in place.
Fit the adjustable feet before using the cooker.
Rest the rear of the cooker on a piece of the polystyrene packaging, exposing the base for
1
fitting the feet.
Fit the four feet by screwing them tight into the support base as shown.
2
Levelling the cooker
Level the cooker by screwing the feet in or out,
as shown in Fig.5.
Fig. 3 Location of feet
Installation instructions
Fig. 4 Top of feet to be
screwed in tightly
Dotted line showing
the position of the
cooker when installed
(*) Depending on
feet adjustment
Fig. 5 Levelling the cooker
7