Using The Rotisserie - Fisher & Paykel OB90 User Manual

Using the rotisserie

10
Lock stud
Prepare the rotisserie supports.
1
Place the grill tray on the
benchtop.
Insert the supports into the lock
studs.
Push the supports all the way
down to lock them in firmly.
Position the skewer on the supports.
3
Place the skewer on the
supports, and check that the
meat does not touch the grill
tray.
Twist the handle off. It must not
be left in the oven.
Rotate the fork screws to
loosen and tighten
Secure the meat.
2
Important!
Take care, the forks are sharp!
When securing the meat, ensure that:
the skewer goes through the
centre of the meat
the forks hold the meat firmly in
place
the fork screws are tightened
there are no loose or projecting
parts. Poultry should be trussed.
Note: the rotisserie can rotate up
to 6 kg of meat.
Rotisserie drive hole
Place the rotisserie in the oven.
4
Slide the grill tray all the way to
the back on shelf position 1.
Push the skewer through the
hole cover on the right-hand
wall of the oven, then insert it
fully into the rotisserie drive
hole.
Fork
Skewer