Removing A Pci Or Pci Express Card From A Mini Tower Computer - Dell OptiPlex 360 Service Manual

• If you are installing a card, ensure that the appropriate driver for the card is
also installed. For instructions, see the documentation that came with the
card.

Removing a PCI or PCI Express Card From a Mini Tower Computer

1 Follow the procedure in "Before Working on Your Computer" on page 9.
2 Remove the computer cover (see "Removing the Mini Tower Computer
Cover" on page 19).
3 Gently push the release lever on the card retention latch to pivot the latch
open. The latch remains in the open position.
1 alignment guides (4)
3 release lever
5 card retention latch
4 If necessary, disconnect any cables connected to the card.
5 If you are removing the card permanently:
Install a filler bracket in the empty card-slot opening.
a
30
Cards
1
5
4
2
3
2 card
4 card slots (4)