Configuring Your Computer After Removing Or Installing A Pci/Pci Express Card - Dell Inspiron 518 Service Manual

Replace the card retention bracket ensuring that:
The guide clamp is aligned with the guide notch.
l
The tops of all cards and filler brackets are flush with the alignment bar.
l
The notch in the top of the card or filler bracket fits around the alignment guide.
l
1 alignment guide
3 alignment bar
5 guide clamp (2)
Configuring Your Computer After Removing or Installing a PCI/PCI Express Card
NOTE: For information on location of connectors, see the Quick Reference Guide. For information on installing drivers and software for your card, see the
documentation that shipped with the card.
Installed
Sound 1. Enter system setup (see
Card System Setup)
2. Go to Integrated
Peripherals and select
Onboard Audio
Controller, and then
change the setting to
Disabled.
3. Connect the external
audio devices to the
sound card's connectors.
Network 1. Enter system setup (see
Card System Setup)
2. Go to Integrated
Peripherals and select
Onboard LAN Controller,
and then change the
setting to Disabled.
3. Connect the network
cable to the network
card's connector.
Back to Contents Page
2 filler bracket
4 card retention bracket
6 guide notch (2)
Removed
1. Enter system setup (see
System Setup)
2. Go to Integrated
Peripherals and select
Onboard Audio
Controller, and then
change the setting to
Enabled.
3. Connect the external
audio devices to the
computer's back panel
connectors.
1. Enter system setup (see
System Setup)
2. Go to Integrated
Peripherals and select
Onboard LAN Controller,
and then change the
setting to Enabled.
3. Connect the network
cable to the integrated
network connector.