If You Are Installing A New Card, Remove The Filler Bracket Covering The Empty Card Slot. To Remove A Filler Bracket, Gently Insert A Scribe Under The Top Edge Of The Bracket; Prepare The New Card For Installation - Dell OptiPlex 360 Service Manual

2
1
1 release lever
3 alignment guides (3)
5 card retention latch
4 If you are installing a new card, remove the filler bracket covering the
empty card slot. To remove a filler bracket, gently insert a scribe under the
top edge of the bracket.

5 Prepare the new card for installation.

NOTE:
For information on configuring the card, making internal connections,
or customizing it for your computer, see the documentation that came with the
card.
3
4
5
6
2 filler bracket
4 card
6 system board connector
37
Cards