Replacing Or Adding A Floppy Drive Or Media Card Reader In The Desktop Computer - Dell OptiPlex 360 Service Manual

Replacing or Adding a Floppy Drive or Media Card Reader in the
Desktop Computer
NOTE:
This procedure assumes that you have completed the removal procedure
first.
1 If you are installing a new floppy drive or media card reader:
Remove the drive panel insert installed in the drive bay.
a
Remove the four shoulder screws from the drive panel insert.
b
Attach the shoulder screws to the new floppy drive or media card
c
reader.
2 If you are replacing an existing floppy drive or media card reader, remove
the four shoulder screws from the existing drive or media card reader.
3 Insert the four shoulder screws into the sides of the new floppy drive or
media card reader, and tighten them.
68
Drives
Drive Panel Insert