Recording From An External Source; Setting A Disc To Protect - FUNAI Symphonic CWR20V5 Owner's Manual

Settings for an external source (cont'd)

Recording from an external source

Video VR
DVD-RW DVD-RW DVD-RW DVD-RW
Before recording from an external source, see the instructions for the connection on page 34.
1. Turn on the TV and the unit and be sure to select the input
of the TV to which the unit is connected.
Refer to the table on page 15.
2. When you want to record to the disc: Press:
Press [OPEN/CLOSE A] to open the disc
tray. Place the disc to record.
3. Press [OPEN/CLOSE A] to close the disc tray.
This operation may take a while to be recognized.
When you want to record to a videotape: Press:
Insert the videotape with a record tab into the cassette
compartment.
4. Select the input of the unit which the external equipment is
connected. (L2 or L1)
•To use the input jacks on the back of this unit, select "L1" position by
pressing 0,0,1 on the remote control or [CHANNEL K / L].
•To use the input jacks on the front of this unit, select "L2" position
by pressing 0,0,2 on the remote control or [CHANNEL K / L].
5. Select a recording speed by pressing [REC SPEED].
Refer to "Recording speed" on page 25 for DVD or page 75 for VCR.
6. Press [RECORD] (VCR/DVD) on the unit to start recording.
7. Press "Play" on the external source to record from.
8. For disc:
Press [STOP C] on the unit to stop recording.
This operation may take a while to be completed.
For videotape:
Press [STOP C / EJECT A] on the unit to stop recording.
VR
DVD-RW DVD-RW
To prevent accidental recording, edit-
ing or erasing of the titles, you can
protect them from the Setting menu.
1
Press [SETUP].
Easy Setting Menu or Advanced
Setting Menu will appear.
2
Using [K / L], select "Disc".
Press [ENTER].
Disc menu will appear.
Recording
DVD-R DVD-R
VCR VCR

Setting a disc to protect

3
Using [K / L], select "Disc
Protect OFF ➔ ON". Press
[ENTER].
Confirm window will appear.
Disc Protect OFF
Yes
No
4
Using [K / L], select "Yes".
Press [ENTER].
A disc will be protected.
Writing to Disc
This operation may take a
while to be completed.
DVD
VCR VCR
5
F.FWD STOP/EJECT
8
1
Note
• The Disc Protect setting is avail-
ON
• You can select only Disc Protect
To cancel the disc protect:
• When you insert a disc protect-
90%
POWER OPEN/CLOSE
T-SET TIMER PROG.
.@/:
ABC DEF
1 2 3
CH
GHI JKL MNO
4 5 6
PQRS TUV WXYZ VIDEO/TV
7 8 9
DISPLAY SPACE CLEAR SETUP
0
TOP MENU MENU/LIST RETURN ENTER
REC/OTR REC/OTR
VCR DVD
REC SPEED PLAY
REC MONITOR SKIP PAUSE SKIP
6 2 3
OPEN/CLOSE
PLAY RECORD CHANNEL DUBBING SELECT STOP PLAY RECORD
VCR SELECT DVD
4 8
DISPLAY SPACE CLEAR
SETUP
0
TOP MENU MENU/LIST RETURN ENTER
able only for a DVD-RW disc
recorded in VR mode.
off when a protected disc is
inserted.
ed in this unit,"Disc Protect ON
→ OFF" will appear .
Disc Protect ON OFF
Yes
No
To cancel the protection setting
for the disc, select "Disc Protect
ON → OFF" at step 3, then
select "Yes".
4
6
S-VIDEO VIDEO
2
3
4
35