FUNAI Symphonic CWR20V5 Owner's Manual page 34

10
Press [ENTER] when infor-
mation is entered.
Your program setting will be stored.
• To set another program, repeat
steps 4 to 10.
• To exit, press [SETUP].
• When programs are overlapped,
"Overlap" and the overlapped
program numbers will appear on
the display.
Checking, canceling or correcting the timer programming
information
1
Press [T -SET].
indicator disappears from the
front display.
2
Press [TIMER PROG.].
Timer Programming list will appear.
Timer Programming
Date Start End CH
1. ---
2. ---
3
Check the information on the
list you will need.
To stop the Timer Recording in progress
Press [STOP C] to stop the disc recording or [STOP C / EJECT A]
to stop the videotape recording on the front panel of the main unit.
[STOP C] on the remote control is not effective.
If the timer program did not complete correctly, the error
number appears on the timer programming list.
Timer Programming
Date Start End CH
* JAN/01 12:57AM 1:57AM 8
2. ---
3. ---
4. ---
5. ---
6. ---
7. ---
8. ---
Press [CLEAR] to erase the
selected program.
• A program with the error number is grayed out and asterisked on the timer programming list.
• Once the timer programming list with error indication is displayed, the program line(s) with error will be
cleared only after the programs are cancelled and reset to the timer standby mode.
32
Recording
Timer Recording (cont'd)
11
Press [T -SET].
The unit will be set in the timer
standby mode.
indicator will appear on the
front display.
• "VCR" will appear if VCR Timer
Recordings have been set.
4
To clear the timer programming:
Using [K / L], select the pro-
gram. Press [CLEAR].
To correct the timer program-
ming:
Using [K / L], select the pro-
gram. Press [ENTER].
Next, correct the timer program-
VCR DVD
ming using [K / L / { / B].
DVD Speed
VCR
Finally, press [ENTER] again.
5
Press [TIMER PROG.] to exit.
6
Press [T -SET] to return to
the timer standby mode.
Each error number means:
VCR DVD
E1-22, E37-39 Recording error
Speed
DVD
VCR
DVD E22
E23-24 Unrecordable disc
E25-28 Copy prohibited program
E29 Disc protected
E30 Disc full
E31-32 Already 99 titles recorded
Already 999 chapters
E33
recorded
E34 No space for Control
information
E35 PCA full
other than below
POWER OPEN/CLOSE
T-SET TIMER PROG.
11
.@/:
ABC DEF
1 2 3
GHI JKL MNO
4 5 6
PQRS TUV WXYZ VIDEO/TV
7 8 9
DISPLAY SPACE CLEAR
0
TOP MENU MENU/LIST RETURN
POWER OPEN/CLOSE
T-SET TIMER PROG.
1
.@/:
ABC DEF
1 2 3
6
GHI JKL MNO
4 5 6
PQRS TUV WXYZ VIDEO/TV
7 8 9
DISPLAY SPACE CLEAR
0
TOP MENU MENU/LIST RETURN
REC/OTR DVD REC/OTR
VCR
Note
• Press [TIMER PROG.] to
confirm the timer program-
ming.
- When the Timer Recording is
in progress, that program will
be highlighted in red. In this
case, you cannot select any
other program for correction
or add any new programs.
- You cannot select any pro-
grams for correction or add
new programs while the unit
is in timer standby mode.
• The unit will be turned on
automatically before the
recording time.
E36 Already finalized Video
format disc
E40 Some portion has not
been recorded because
of program overlapping.
Recording did not start
at the start time.
No Videotape is inserted.
Videotape ran out during
recording.
E41 Power failed
E42 No disc when recording
CH
SETUP
ENTER 10
2
CH 5
SETUP
ENTER
4