Recording From An External Source; Setting A Disc To Protect - FUNAI SV2000 WV20V6 Owner's Manual

Settings for an external source (cont'd)

Recording from an external source

DVD+R DVD+R DVD+R
DVD+ DVD+RW DVD+RW
Before recording from an external source, see the instructions for the
connection on page 35.
1. Turn on the TV and press [STANDBY-ON] and be sure to select the
input of the TV to which the unit is connected.
Refer to the table on page 15.
2. When you want to record to the disc: Press:
Press [OPEN/CLOSE A] to open the disc tray. Place the disc to
record properly.
3. Press [OPEN/CLOSE A] to close the disc tray.
This operation may take a while to be recognized.
When you want to record to a videotape:
Insert the videotape with a record tab into the cassette
compartment.
4. Select the input of the unit which the external equipment is
connected. (E2 or E1)
• To use the input jacks on the back of this unit, select "E1" position by
pressing [0], [0], [1] with the Number buttons or using
[CH K / L] on the remote control, or [CHANNEL L / K] on the front
panel.
• To use the input jacks on the front of this unit, select "E2" position by
pressing [0], [0], [2] with the Number buttons or using
[CH K / L] on the remote control, or [CHANNEL L / K] on the front
panel.
5. Select a recording mode by pressing [REC MODE].
Refer to "Recording mode" on page 25 for DVD or page 74 for VCR.
6. Press [DVD REC] ([VCR REC]) on the remote control or [RECORD]
(DVD/VCR) on the front panel to start recording.
7. Press "Play" on the external source to record from.
8. For disc:
Press [STOP C] on the remote control or on the front panel to stop
recording.
This operation may take a while to be completed.
For videotape:
Press [STOP C] on the remote control or [STOP C / EJECT A] on
the front panel to stop recording.
DVD+R DVD+R DVD+R
DVD+RW DVD+RW DVD+
+VR
DVD-R DVD-R DVD-R
To prevent accidental recording,
editing or erasing the titles, you
can protect them from the Setup
menu.
1
Press [SETUP].
2
Using [K / L], select "Disc Edit".
Press [OK].
Disc menu will appear.
3
Using [K / L], select "Disc
Protect OFF ON". Press [OK].
36 EN
Recording
+VR
+VR
DVD-RW DVD- DVD-RW DVD-R DVD-R DVD-R

Setting a disc to protect

Confirmation window will appear.
+VR
DVD-RW
DVD- DVD-RW
Disc Protect OFF
Yes
No
4
Using [K / L], select "Yes".
Press [OK].
A disc will be protected.
This operation may take
a while to be completed.
VCR VCR VCR
DVD DVD
VCR VCR
Press:
ON
STANDBY-ON
1
TIMER SET TIMER
.@/:
ABC DEF
1 2 3
4
GHI JKL MNO
4 5 6
PQRS TUV WXYZ
7 8 9
DISPLAY SPACE CLEAR
0
TITLE DISC MENU RETURN
REC DVD
VCR
5 REC MODE PLAY
RAPID PLAY PREV PAUSE
SLOW CM SKIP STOP
DUBBING ZOOM AUDIO
2
OPEN/CLOSE
STOP/EJECT PLAY RECORD CHANNEL D.DUBBING
VCR REC D.DUBBING TIMER REC DVD REC
VCR DVD
8 6 4
DISPLAY SPACE CLEAR
0
2
TITLE DISC MENU RETURN
3
4
Note
To cancel the disc protect:
• When you insert a disc
protected with this unit,
"Disc Protect ON
appear instead of "OFF
Disc Protect ON OFF
Yes
No
To release the protect for the
disc, select "Disc Protect
ON OFF" at step 3, then
select "Yes".
OPEN/CLOSE
2
3
CH
VIDEO/TV
SETUP
OK
REC
6
NEXT
SEARCH
8
3
SELECT STOP PLAY RECORD
VCR SOURCE DVD
8 6
SETUP
1
OK
OFF" will
ON".