Connection To A Cable Box Or Satellite Box - FUNAI Symphonic CWR20V5 Owner's Manual

Dvd recorder with video cassette recorder
Table of Contents

Advertisement

Available languages

Available languages

After you have completed connections
• Switch the input selector on your TV to an appropriate external input channel (usually near channel 0). Press a but-
ton on the TV's original remote control that selects an external input channel until the DVD recorder's picture
appears. Check your TV owner's manual for details.
Admiral
Curtis Mathis
GE
Hitachi
JVC
Kenwood
LXI-Series
Magnavox

Connection to a cable box or satellite box

Cable TV signal
This connection allows you to view or record a scrambled channel.With this connection, channels cannot be
changed on this unit.You can view or record ONLY the channels you have selected on the cable box or the
satellite box.
• While you are recording, only the recorded channel can be viewed.
To select channels of the cable box or satellite box
1) Turn on this unit by pressing [POWER].The "POWER" indicator on the front panel will appear. Then,
press [CHANNEL L / K] to select channel 3 or 4 (the same channel as the output channel of the cable
box or satellite box).
• If noise appears on the TV screen, press [VIDEO/TV] on the remote control.
• If you use the channel 4, you will need to change this unit's RF output to channel 4. Refer to "RF output
switch" on page 81.
2) At the TV, select channel 3 or 4 (the same channel as you have selected at step 1).
3) At the cable box or satellite box, select the channel you want to view or record.
Note to the Cable TV System Installer :
This reminder is provided to call the Cable TV system installer's attention to Article 820-40 of the
National Electrical Code, which provides guidelines for proper grounding - in particular, specifying that the
cable ground shall be connected to the grounding system of the building, as close to the point of cable
entry as possible.
Connections
Input Mode Names for Common TV Brands (Example)
AUX
LINE1, LINE2, 00, 90, 91, 92, 93
INPUT, TV/VCR, 00, 90, 91, 92, 93
INPUT, AUX
A/V CHANNEL, INPUT1, SVIDEO, INPUT2
AUX
00
AUX CHANNEL
(Cable box or
DVD/VCR
Satellite box)
IN
O U T
Panasonic
TV/ VIDEO
RCA
INPUT, TV/VCR, 00, 90, 91, 92, 93
Samsung
TV/ VIDEO
Sanyo
VIDEO
Sharp
00
Sony
VIDEO1, VIDEO2, VIDEO3
Toshiba
TV/ GAME
Zenith
00
(Back of this unit)
ANTENNA
IN
OUT
RF cable
(supplied)
(Back of TV)
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents