Timer Recording - FUNAI Symphonic CWR20V5 Owner's Manual

Video VR
DVD-RW DVD-RW DVD-RW DVD-RW
VCR
VCR
You can program the unit to record
up to 8 programs within a month in
advance. Daily or weekly program
recordings are also available.
• Be sure to set the clock before
programming a timer recording.
• Insert a recordable disc or a
videotape with a record tab.
1
Press [SETUP].
Easy Setting Menu or Advanced
Setting Menu will appear.
If Easy Setting Menu is displayed,
proceed to step 3.
2
(Advanced Setting Menu only)
Using [K / L], select
"Recording". Press [ENTER].
Recording menu will appear.
Recording
DVD-RW Recording Format Video mode
Auto Chapter 10 minutes
Timer Programming
Auto Finalize
Dubbing Mode VCR
3
Using [K / L], select "Timer
Programming". Press
[ENTER].
Timer Programming list will appear.
Timer Programming
Date Start End CH
1. ---
2. ---
3. ---
4. ---
4
Using [K / L], select a pro-
gram number. Press
[ENTER].
5
Using [K / L], enter the date.
Press [B].
Timer Programming
Date Start End CH
1. JAN/01 --:-- --:-- L1 DVD
2. ---
3. ---
4. ---
Recording

Timer Recording

When pressing [L] at the cur-
DVD-R DVD-R
rent date,Timer Recording mode
will change as follows.
e.g. January 1st
6
Using [K / L], enter start and
end time. Press [B].
Timer Programming
Date
DVD
1. JAN/01
2. ---
7
Using [K / L], select the channel
DVD
number. Press [B].
Timer Programming
Date
1. JAN/01 12:57AM
2. ---
To record from external input,
select L1 or L2.
8
VCR DVD
Using [K / L], select a record-
Speed
DVD
VCR
ing media. Press [B].
Timer Programming
Date
1. JAN/01 12:57AM
2. ---
• To record on to a videotape, select
VCR.
• To record on to a disc, select DVD.
9
Using [K / L], select a record-
ing speed.
Timer Programming
Date
1. JAN/01 12:57AM
VCR DVD
2. ---
Speed
DVD
VCR
Refer to "Recording speed" on page
25 for DVD or page 75 for VCR.
JAN/01
Daily
MON-SAT
MON-FRI
SAT
FRI
SUN
JAN/31
VCR DVD
Start End CH Speed
DVD
VCR
12:57AM --:-- L1 DVD
VCR DVD
Start End CH Speed
DVD
VCR
1:57AM 8 DVD
VCR DVD
Start End CH Speed
DVD
VCR
1:57AM 8 DVD
VCR DVD
Start End CH DVD Speed
VCR
1:57AM 8 DVD 1H
You can choose the timer
programming menu by press-
ing [TIMER PROG.]. In this
case, continue with step 4.
POWER OPEN/CLOSE
T-SET TIMER PROG.
.@/:
ABC DEF
1 2 3
CH
GHI JKL MNO
4 5 6
PQRS TUV WXYZ VIDEO/TV
7 8 9
DISPLAY SPACE CLEAR
SETUP
0
TOP MENU MENU/LIST RETURN ENTER
REC/OTR DVD REC/OTR
VCR
REC SPEED PLAY
REC MONITOR SKIP PAUSE SKIP
SLOW CM SKIP STOP SEARCH
DUBBING ZOOM AUDIO
Note
• If you have not set the
clock yet:
A clock setting window will
appear after step 3. Continue
with step 4 in "Auto Clock
Setting" on page 22 or
"Manual Clock Setting" on
page 23 before setting a timer
programming.
• Use [{ / B] to move the
cursor to the left and the
right on the timer program-
ming menu.
• After step 11, you can use the
other component (VCR or
DVD) which is not currently
programmed by turning the
power on. Note that the pro-
grammed device will start to
capture the selected channel 2
minutes before the start time
and at the moment, if the other
device still stays in recording,
recording pause or OTR mode
turning a different channel, the
current mode will be canceled
and you cannot change the chan-
nel.When both devices capture
the same channel, the current
mode continues to function.
1
2
3
4
5
6
7
8
9
31