Table of Contents
Advertisement
H9779ED(EN).fm Page 15 Monday, October 25, 2004 4:21 PM
Real Time Tape Counter
• This shows the elapsed recording or playback time in
hours, minutes, and seconds on screen. (Nothing is shown
in the case of blank portion.)
• The " – " indication will appear when the tape is rewound
further than the tape counter position "0:00:00".
Timer Recording
You may programme the DVD/VCR to start and end a
recording while you are away. You can set 8 programmes to
record on specific days, daily or weekly within a 1-year period.
• Use the remote control for this procedure.
• Insert a cassette tape with its erase-prevention tab in place.
(If necessary, rewind or fast forward the tape to the point at
which you want to begin recording.)
1) Press
VCR
MENU
, then
.
2) Press
or
to select "TIMER", then press
K
L
Note:
If you have not set the clock yet, "CLOCK" setting
menu appears. If so, follow the steps outlined in the
"Setting the Clock". Then, set the timer.
• When you press
after pressing
B
9)
, the input mode will move to the next step.
• If you do not press
within 5 seconds of setting an item,
B
the input mode will move to the next step.
• Press
to go back one step from the current setting during
s
4)
9)
steps
to
. If
is pressed when the TIMER NUMBER
s
is flashing, the entire programme contents will be erased.
3) Programme number flashes. Press
the desired programme number appears. Then, press
4)
For once-only recording
: Press
the relevant month appears.
For daily recording
: To record a TV programme at the
same time on the same channel from Monday through
Friday. While the month digit is flashing, press
repeatedly to select "MO-FR".
For everyday recording
: To record a TV programme at
the same time on the same channel everyday. While the
month digit is flashing, press
"MO-SU".
For weekly recording
: To record a TV programme at the
same time on the same channel every week. While the
month digit is flashing, press
"W-MO" (example: every monday).
5)
For once-only recording only
until your desired day appears.
6) Press
or
repeatedly until the relevant start hour
K
L
appears. Next, enter the minute digit.
7) Press
or
repeatedly until the relevant end hour
K
L
appears. Next, enter the minute digit.
8) Press
or
repeatedly until the relevant channel number
K
L
appears.
9) Press
or
repeatedly until the desired tape speed
K
L
appears.
10)Press
. Programme 1 is now completed.
B
•To set another timer programme, repeat steps
11)Press
MENU
to exit.
.
B
or
during steps
3)
to
K
L
or
repeatedly until
K
L
.
B
or
repeatedly until
K
L
or
K
L
or
repeatedly to select
K
L
or
repeatedly to select
K
L
: Press
or
repeatedly
K
L
3)
10)
to
.
15
12)Press
T-SET
to activate a timer recording.
The VCR goes into timer-standby mode.
MENU
TIMER
SET UP
INITIAL
To Stop a Timer Programme Which Has Already
Started
Press
STOP/EJECT
on the DVD/VCR.
Note: STOP
on the remote control will not function in the
Timer Recording mode.
To Correct Timer Programmes
If the unit is already in timer standby mode, press
STOP/EJECT
T-SET
on the unit or
mode.
1) Repeat steps
1)
3)
to
in the "Timer Recording".
2) Select the setting you want to change using
3) Enter the correct numbers using
4) Press
MENU
to exit.
5) Press
T-SET
to return to timer standby mode.
To Cancel or Check the Start/End Time
If the unit is already in timer standby mode, press
STOP/EJECT
on the unit or
T-SET
mode.
1) Repeat steps
1)
to
2)
in the "Timer Recording".
2) Select a programme number you want to check using
. The details of selected programme appears on the TV
L
screen. You may cancel the entire programme by pressing
.
s
3) Press
MENU
to exit.
Avoid Overlap of TIMER Programmes...
A timer programme does not work while another programme
is under execution.
Programme 1
Programme 2
Programme 3
9:00
Hint for Timer Recording
• If either there is a power failure or this unit is unplugged for
more than 30 seconds, clock and all timer settings are lost.
• If a tape is not in this unit or does not have the erase-
prevention tab, the TIMER REC indicator flashes and
timer recording cannot be performed. Please insert a
recordable tape.
• If a tape runs out before a timer recording is finished, the
unit ejects the tape and switches into DVD mode
automatically. The TIMER REC indicator flashes. Press
T-SET
to activate VCR function.
• Once the unit goes into Timer- standby mode, no VCR
T-SET
functions are available until
the front panel and
VCR
on the remote control will not
function.)
• When all timer recordings are finished, the TIMER REC
indicator will flash.
TIMER NUMBER
1
--/--
DATE
START
--:--
--:--
END
--
CHANNEL
--
SPEED
to exit from the standby
or
.
B
s
or
, then press
.
K
L
B
to exit from the standby
or
K
10:00
11:00
OUTPUT
is pressed. (
on
EN
Advertisement
Table of Contents
