Dell PowerEdge systems 6300 User Manual page 50

3-18 Dell PowerEdge 6300 Systems User's Guide
This section describes how to install the aic78u2.ham and aha2940.ham drivers at
the same time you install NetWare 4.11. If NetWare 4.11 is already installed and you
wish to install or update the aic78u2.ham and aha2940.ham drivers, refer to the Net-
Ware User's Guide for installation instructions. Also, refer to the NetWare User's
Guide for information about partitioning, creating a server name, and checking the IPX
network number.
Follow these steps only if you are upgrading to NetWare 4.11 or installing it for the
first time:
The installation files are located in the root directory on the CD-ROM.
install
If you select a simple installation, you can press <F1> to view the defaults for the
installation.
Even if you plan to install NetWare SMP , select No at this screen. The
IntraNetWare Support Pack 4 or later must be applied before NetWare SMP can
be installed. To apply IntraNetWare Support Pack 4, see "Applying IntraNetWare
Support Pack 4.0A" found later in this section.
The system now searches for existing device drivers and hardware.
If you have not already created this diskette, refer to Chapter 2, "Using the Dell
Server Assistant CD," in this book for instructions.