Dell PowerEdge systems 6300 User Manual page 23

This chapter describes the bootable Dell Server Assistant CD and tells you how to use
the utilities, diagnostics, documentation, drivers, and other items included on the CD.
Most of the functions available on the Dell Server Assistant CD are also available
using a bootable utility partition that is installed on your hard-disk drive. This chapter
describes the utility partition and provides instructions for reinstalling the partition (if
necessary) and information about using the utility partition menu.
The system must be running to insert the Dell Server Assistant CD. To boot from the
CD, insert it into the PowerEdge 6300 system's CD-ROM drive and press
<Ctrl><Alt><Del>. When the system boots, the CD main menu appears.
If the CD does not boot, check the following settings:
In the System Setup program, the Secondary SCSI category must be set to On
and the Boot Sequence category must be set to Diskette First (both of these set-
tings are the defaults for their respective categories). See Chapter 4, "Using the
System Setup Program," for more information.
In the SCSI Select utility, the BIOS Support For Bootable CD-ROM category must
be set to Enabled. See Chapter 3, "Installing and Configuring SCSI Drivers," for
more information.
Selections can be made from the CD menus using either a keyboard or a mouse.
Associated help information is displayed in the help box at the bottom of the screen in
the currently selected language (specified via a menu option).
Click Back to return to the previous menu. Click Exit (or press <Alt><x>) to exit the
program. Exiting the program causes the system to reboot to the standard operating-
system boot partition.
Using the Dell Server Assistant CD 2-1