Dell PowerEdge systems 6300 User Manual page 49

b. From the menu that appears, select Run System Utilities.
c. From the Run System Utilities menu, select Create Utility Partition.
d. At the Welcome... screen, select OK and press <Enter>.
e. At the message Installation completed successfully, select OK
and press <Enter>.
f. Select Exit and press <Enter>.
g. At the Exit Confirmation dialog box, remove the Dell Server Assistant CD,
insert the Dell IntranetWare Support CD, select OK, and press <Enter> to
reboot the server.
NOTE: Dell recommends running the
need to specify a different size for the primary MS-DOS partition. Running the
fdisk utility in automated mode creates a 25-MB partition.
Warning...
The program partitions and then reboots the system.
The message FILE TRANSFER COMPLETE appears briefly, and then you are
returned to the main menu.
q
Your hard-disk drive has been prepared for NetWare installation. Continue to the
next subsection, "Installing NetWare 4.11."
1
2
utility in automated mode unless you
2
y
4
y
Installing and Configuring SCSI Drivers
y
3-17