Dell PowerEdge systems 6300 User Manual page 34

3-2 Dell PowerEdge 6300 Systems User's Guide
SCSI device drivers are provided for the following operating systems:
Microsoft Windows NT Server 4.0
Novell NetWare 4.11
See Chapter 2, "Using the Dell Server Assistant CD," for instructions on creating a
diskette of drivers for your operating system. For instructions on configuring the SCSI
device drivers, see the appropriate sections in this chapter.
To install SCSI drivers for a PowerEdge Expandable RAID Controller in Windows NT 4.0,
follow these steps:
This disables automatic detection of SCSI devices.
Press <s> for the Specify Additional Device option. Insert the PowerEdge
Expandable RAID Controller driver diskette into drive A, and select PowerEdge
RAID I NT Driver from the list of drivers.
The screen should list the following SCSI device driver:
PowerEdge RAID I NT DRIVER
The Adaptec AHA-294 x /AHA-394 x /AIC-78 xx SCSI controller needs to be manu-
ally selected.
To install SCSI drivers for a PowerEdge Expandable RAID Controller in NetWare 4.11,
follow these steps: