Dell PowerEdge systems 6300 User Manual page 42

3-10 Dell PowerEdge 6300 Systems User's Guide
To install the SCSI drivers, use the following procedure:
Windows NT copies files to your system and automatically reboots your system.
At the first blue screen after reboot, Windows NT Setup will display the following
message:
Setup is inspecting your computer's hardware
configuration...
The following message appears:
Setup could not determine the type of one or more mass stor-
age devices installed in your system, or you have chosen to
manually specify an adapter.
s
A list of supported SCSI host adapters appears.
s
For the Adaptec AIC-7890 SCSI controller, select Adaptec AHA-294 x U2/295 x U2/
AIC-789 x PCI Ultra2 SCSI controller (Windows NT 4.0).
For the Adaptec-7860 SCSI controller, select Adaptec AHA-290 x /291 x /294 x /394 x /
494 x /AIC-78 xx PCI SCSI Controller (Windows NT 4.0).
The driver is copied from the diskette to your system.
After the system reboots, the new drivers are active. Some drive letter assignments
may have changed from the previous configuration.
a:\