Dell PowerEdge systems 6300 User Manual page 48

3-16 Dell PowerEdge 6300 Systems User's Guide
To create a driver diskette from the Dell Server Assistant CD for driver installation pur-
poses, perform the following steps:
NOTE: Remember to label the driver diskette; for example, label it NetWare 4.11
Driver Updates .
To prepare the hard-disk drive for NetWare installation, you must create a utility
partition on the drive (if needed), create the primary MS-DOS partition, format the
MS-DOS partition, install the c:\dos and c:\scsi subdirectories, and install certain
system files.
You do not need to create a utility partition if you are installing NetWare 4.11 for the
first time on your system. Dell shipped your system with the utility partition already
created on the hard-disk drive; you can proceed to create the primary MS-DOS parti-
tion on the drive. If you are reinstalling NetWare 4.11, you will need to delete the
utility partition and re-create it.
Using the following procedure, you can prepare the hard-disk drive using the Dell
Server Assistant and Dell IntranetWare Support CDs.
a. Insert the Dell Server Assistant CD into the server's CD-ROM drive and turn
on (or reboot) the system.
The diskette was created successfully