Setting Time - Alpine MDA-W750 Owner's Manual

1
2
3
4
36
Clock Operation

Setting Time

Make sure you are in the Clock mode by
pressing the Clock button (see page 34). Then,
12:30
press and hold the CLK ADJ. button for at least
2 seconds. The time indication will begin to
blink.
To set the time to the nearest hour, press the
CT button while the time indication is blinking.
12:00
For example, if the time shown in the display is
9:35, the CT function will change it to 10:00. If
the display shows 9:29, the CT function will set
the time to 9:00.
Example: To adjust to 9:35
9:00
Press the "H" button to adjust the hours while
the time indication is blinking.
Press the "M" button to adjust the minutes while
the time indication is blinking.
9:35
The time automatically sets after 5 seconds of
inactivity.
9:35
English