Manual Storing Of Station Presets - Alpine MDA-W750 Owner's Manual

1
42
Radio Operation
Manual Storing of Station
Presets
1. Tune in the desired radio station you wish to
store in the preset memory.
2. Press and hold any one of the preset
buttons ( through
seconds. The "USER MEMORY" display
will begin to blink.
3. Press the preset button into which you wish
to store the station while the display is
blinking (within 5 seconds).
The display stops blinking once the station
has been memorized. The display shows the
band, preset No. and the station frequency
memorized.
4. Repeat the procedure to store 5 other
stations onto the same band.
To use this procedure for other bands,
simply select the band desired and follow
steps 1 – 3 above.
A total of 24 stations can be stored in the preset
memory (6 stations for each band; FM1, FM2,
AM and D.A.P.).
Notes:
• "Preset memory" works when the function
mode is OFF.
Refer to "Using the Function button" on page
32.
• If you store a station in a preset memory
which already has a station, the current
station will be cleared and replaced with the
new station.
English
) for at least 2