Subwoofer On And Off - Alpine MDA-W750 Owner's Manual

1
2
3
18
Basic Operation

Subwoofer On and Off

This unit is not equipped with a low pass filter.
Turn on the Subwoofer Output when an
amplifier having the built-in filter is connected to
drive your subwoofer.
Press and hold the INTLZ (initialize) button for
at least 3 seconds.
Press the preset button
Subwoofer ON
woofer ON.
Each press will toggle the subwoofer on and off.
Subwoofer OFF
When setting is completed, press the INTLZ
button to return to the normal mode.
Notes:
•
•
•
Initial mode is "Subwoofer OFF."
Leave the "Subwoofer OFF" as long as the
Subwoofer output is not being used.
When the subwoofer is turned on, the
subwoofer output level can be adjusted. For
more details, refer to the Adjusting Volume/
Balance/Fader section on page 28.
English
to display Sub-