Registering The User Install - Konica Minolta bizhub 25e Manual

Setting
Image
Encoding
Method
Network
Connection
Setting
*1 Make sure that the total number of characters of prefix and fax number or suffix and fax
number are within 50 characters..
5
Click [Save].
Click [Back] not to save the setting and return to the "Machine Setup" list screen.
NOTE
Underlined values are the default settings specified at the time of shipment.

Registering the user install

You can specify the settings required for using the machine.
1
Click [Admin Login] in Message Board, and log in
This function may also be available on Guest and User login screen, depending on user policy
settings.
2
Click [Machine Settings], and then [Machine Setup].
3
Click "User Install".
4
Set the detailed information.
For details, see chapter 7, "Initial setup (User Install)" in the Scanner and Fax Guide.
5
Click [Save].
Click [Back] not to save the setting and return to the "Machine Setup" list screen.
Description
Specify the image encoding method.
Switches the communication speed and
communication method. Change this
setting when errors occur during network
communication.
Settings
MH
MR
MMR
JBIG
Auto
100Mbps - Full Duplex
100Mbps - Half Duplex
10Mbps - Full Duplex
10Mbps - Half Duplex
(page 1-7).
Specifying device settings
1
2
3
3-23