Konica Minolta bizhub 25e Manual page 68

Setting
E-mail address
or domain name
that will accept
forwarded
transmissions
*1 If e-mail is broadcasted in large volumes to multiple addresses, some servers may not accept
the e-mail. If this happens, select "Don't show any recipients.".
With this selected, the destination information is not written in the e-mail.
*2 If you select "Always send a MDN.", but do not add specific e-mail addresses or domains to
allow the response for, an MDN is sent for all e-mail addresses.
*3 If you select "Accept the forwarding request.", but do not add specific e-mail addresses or
domains to allow forwarding requests for, fax forwarding is performed for all e-mail addresses.
5
Click [Save].
•Click [Back] not to save the setting and return to the "E-mail Settings" list screen.
•Click [Initialize] to restore the default settings.
NOTE
Underlined values are the default settings specified at the time of shipment.
Description
If you select "Send to author.", you can specify to forward
faxes only for forwarding requests received from the
specified e-mail addresses or domain names. You can
register up to five e-mail addresses or domain names to
allow forwarding requests for.
If nothing is registered in the list, an MDN is sent for all
e-mail addresses or domain names.
<To add an e-mail address or domain name>
Enter the e-mail address or domain name in the entry
box, and click [Add].
<To delete an IP address or domain name>
Select the e-mail address or domain name to delete, then
click [Delete]. To select all the registered e-mail address
and domain name, check [Select All].
50 characters
(0 - 9, A - z, @,
., -, _)
Setting the e-mail environment
Settings
1
2
3
3-11