Tiff2Ps2 (Linux/Solaris/Hp-Ux) - Dell 3115cn Color Laser Printer User Manual

treated as not specified.
NOTE: Only numbers are acceptable for password.
NOTE: Acceptable password length is between 4 and 12 characters.
Incomplete form of -Jown option is treated as no authentication setting being made. In such
case, if authentication setting is made with the environmental variable, it is used as setting
information.
Example
To output the displayed screen image to a file using the snapshot command and convert the file into the
PostScript language program using the sunras2ps2 command, type as follows:
% sunras2ps2 file.rs > file.ps
To output the displayed screen image to a file using the snapshot command, convert the file into the
PostScript language program using the sunras2ps2 command and output it to a multifunction printer, type
as follows:
% sunras2ps2 file.rs | lp
Important
When -s and -S are specified at the same time or when the same option is specified twice, the later
setting will prevail.
If the output size option (-s, -S) is not specified, scaling will be executed taking one pixel of the raster
data as one pixel of the multifunction printer.
If the print position option specifies a point beyond the printable area of the multifunction printer, data
beyond the printable area will not be printed.

tiff2ps2 (Linux/Solaris/HP-UX)

Format
/usr/local/dellbin3115/tiff2ps2 [-d] [-D] [-Itray-input] [-t] [-r] [-n] [-l=left,bottom] [-
s=width,height] [-S=width] [-E] [-Nc=copies] [-Cl] [-Hd=position:format] [-Hffont] [-MSI] [-
M=type] [-Mfo=mode] [-Pon] [-St=mode] [-Sp] [-Sb] [-Cm=mode] [-Pr=mode] [-Cc=mode] [-
Gc=mode] [-Sc=mode] [-Gg=mode] [-Ct] [-Br=mode] [-RGBc=mode] [-RGBPr=mode] [-RGBTp=mode] [-
Cb=cyan-low:cyan-middle:cyan-high:magenta-low:magenta-middle:magenta-high:yellow-low;yellow-
middle:yellow high:black-low:black-middle:black-high] [-
Hld=PrintType:UserID:Password:DocumentName] [-Jown= jobownername:password] [filename...]
Function