8.
Turn on the multifunction printer.
NOTE:
The multifunction printer will automatically detect the attached tray but will not detect the
paper type.
9.
Print a system settings page to verify that the optional 550-sheet paper feeder is installed correctly.
a.
Press
until >SETUP appears, and then press
b.
Press
until >Reports appears, and then press
c.
System Settings is displayed. Press
The system settings page is printed.
d.
Verify 550 Sheet Feeder is listed in the system settings under Printer Options .
If the tray module is not listed, turn off the multifunction printer, unplug the power cable, and
reinstall the optional 550-sheet paper feeder.
10.
After loading paper in the installed tray, specify the paper type from the printer operator panel.
a.
Press
until >SETUP appears, and then press
b.
Press
until >Tray Settings appears, and then press
c.
d.
.
.
.
.
.