Repeater Mode - TP-Link TL-WR710N User Manual

Note:
If 11bg mixed mode is selected in the Mode field, the Channel Width selecting field will turn
grey and the value will become 20M, which is unable to be changed.
Channel Width - Select any channel width from the pull-down list. The default setting is
automatic, which can automatically adjust the channel width for your clients.
Wireless Security Mode - This option should be chosen according to the security
configuration of the AP you want to access. It is recommended that the security type is
the same as your AP's security type.
Wireless Password - Input the password of your broadcast SSID.
2. Click the Next button. You will then see the Finish page.
If you don't make any change on the Wireless page, you will see the Finish page as shown
in Figure 3-12. Click the Finish button to finish the Quick Setup.
If there is something changed on the Wireless page, you will see the Finish page as shown
in Figure 3-13. Click the Reboot button to make your wireless configuration take effect and
finish the Quick Setup.

3.2.3 Repeater Mode

When you choose Repeater Mode on Working Mode page in Figure 3-5 , take the following
steps:
1. Click Next, and then Wireless Repeater page will appear as shown in Figure 3-14.
TL-WR710N 150Mbps Wireless N Mini Pocket Router
Figure 3-12 Quick Setup - Finish
Figure 3-13 Quick Setup – Finish
- 19 -