2.
Plug the power plug of the router in electrical wall socket.
3.
Power on the PC(s) and notebook(s).
2.3.3 Repeater Mode
Repeat signal from an existing wireless network. This mode is suitable to extend wireless
coverage, reaching devices that were previously too far from your primary router to maintain a
stable wireless connection. The repeated signal will display the same network name and
password as your existing wireless network.
1.
Plug the power plug of the router in electrical wall socket.
2.
Power on the notebook(s).
Note:
It is recommended that you connect a PC/notebook to the LAN port of the Router with an Ethernet
cable, and then login the Router from the PC/notebook to set the Router in Repeater mode.
2.3.4 Client Mode
In this mode, this device can be connected to another device via Ethernet cable and act as an
adapter to grant your wired devices access to a wireless network, especially for a Smart TV,
Media Player, or Game console only with an Ethernet port.
- 7 -