TP-Link TL-WR710N User Manual page 30

2. Then, the Wireless page will appear as shown in Figure 3-9 . Set the wireless parameters. It is
recommended that you rename an SSID, choose a Security Type and enter a Password.
Then click Next.
Wireless Radio - Enable or disable the wireless radio choosing from the pull-down list.
Wireless Network Name - Enter a string of up to 32 characters. The same name of
SSID (Service Set Identification) must be assigned to all wireless devices in your
network. The default SSID is set to be TP-LINK_XXXXXX (XXXXXX indicates the last
unique six numbers of each Router's MAC address). But it is recommended strongly
that you change your networks name (SSID) to a different value. This value is
case-sensitive. For example, TEST is NOT the same as test.
Region - Select your region from the pull-down list. This field specifies the region where
the wireless function of the Router can be used. It may be illegal to use the wireless
function of the Router in a region other than one of those specified in this field. If your
country or region is not listed, please contact your local government agency for
assistance.
Mode - Select the desired mode. The default setting is 11bgn mixed.
• 11bg mixed - Select if you are using both 802.11b and 802.11g wireless clients.
• 11bgn mixed - Select if you are using a mix of 802.11b, 11g, and 11n wireless clients.
TL-WR710N 150Mbps Wireless N Mini Pocket Router
Figure 3-9 Quick Setup - Wireless
- 16 -