TP-Link TL- WR740N User Manual
Hide thumbs
Also See for TL- WR740N:
- User manual (120 pages) ,
- Manual (111 pages) ,
- Quick installation manual (30 pages)
Related Manuals for TP-Link TL- WR740N
Summary of Contents for TP-Link TL- WR740N
-
Page 1: Table Of Contents
TP-Link TL- WR740N/ WR741ND User Guide Contents 1 Main Features The Front Panel of the modem 3 Back Panel 4 How to setup/connect your hardware 5 Quick Installation Guide... -
Page 2: Main Features
Main Features Make use of IEEE 802.11n wireless technology to provide a wireless data rate of up to 150Mbps One 10/100M Auto-Negotiation RJ45 WAN port, four 10/100M Auto-Negotiation RJ45 LAN ports, supporting Auto MDI/MDIX Provides WPA/WPA2, WPA-PSK/WPA2-PSK authentication, TKIP/AES encryption security ... -
Page 3: The Front Panel
The Front Panel of the modem Following indicates the status of the LED lights which provides you the modem’s working status. Back Panel... -
Page 4: How To Setup/Connect Your Hardware
RESET: There are two ways to reset to the Router's factory defaults. 1) Use the Factory Defaults function on System Tools -> Factory Defaults page in the Router's Web-based Utility. 2) Use the Factory Default Reset button: Press the Reset button for five seconds and then wait for the Router to reboot. -
Page 5: Quick Installation Guide
Quick Installation Guide To access the web configuration utility for the router, open a web-browser and type in the default address 192.168.1.1 in the address field of the browser. If 192.168.1.1 is not responding try 192.168.0.1. After sometime, you will be prompted to enter the modem User Name and Password for the modem to login. - Page 6 2. Click Next and then WAN Connection Type page will appear. Select the WAN Connection Type as PPPoE. 3. Configure the following options provided by your ISP: Username, Password. Then click Next. 4. If you are visiting the Router from the main computer, please select Yes, and then click Clone MAC Address.
- Page 7 5. Click Next to continue, the Wireless settings page will appear. Select Wireless Security as WPA-Personal/WPA2-Personal and enter the wireless password in...
- Page 8 password field. 6. Click the Next button. You will then see the Finish page.
- Page 9 7. If there is something changed on the Wireless page, you will see the Finish page as shown below. Click the Reboot button to make your wireless configuration take effect and finish the Quick Setup.