Wireless Mac Filtering - TP-Link TL-WR710N User Manual

152-bit - You can enter 32 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is
not promoted) or 16 ASCII characters.
Note:
If you do not set the key, the wireless security function is still disabled even if you have selected
Shared Key as Authentication Type.
Be sure to click the Save button to save your settings on this page.

8.6.3 Wireless MAC Filtering

Choose menu "Wireless → Wireless MAC Filtering", and then you can control the wireless
access by configuring the Wireless MAC Filtering function, as shown in Figure 8-19.
To filter wireless users by MAC Address, click Enable. The default setting is Disabled.
MAC Address - The wireless station's MAC address that you want to access.
Status - The status of this entry, either Enabled or Disabled.
Description - A simple description of the wireless station.
To Add a Wireless MAC Address filtering entry, click the Add New... button. The "Add or Modify
Wireless MAC Address Filtering entry" page will appear, shown in Figure 8-20:
Figure 8-20 Add or Modify Wireless MAC Address Filtering entry
TL-WR710N 150Mbps Wireless N Mini Pocket Router
Figure 8-19 Wireless MAC Filtering
- 208 -