Advanced Routing; Static Routing List - TP-Link TL-WR710N User Manual

4.14 Advanced Routing

Figure 4-72 The Advanced Routing Menu
There are two submenus under the Network menu (shown in Figure 4-72): Static Routing List
and System Routing Table. Click any of them, and you will be able to configure the
corresponding function.

4.14.1 Static Routing List

Choose menu "Static Routing", and you can configure the static route in the next screen, shown
in Figure 4-73. A static route is a pre-determined path that network information must travel to
reach a specific host or network.
To add static routing entries, follow the steps below.
1. Click Add New... shown in Figure 4-73, you will see the following screen Figure 4-74.
2. Enter the following data.
Destination Network - The Destination IP Address is the address of the network or host
that you want to assign to a static route.
TL-WR710N
Figure 4-73 Static Routing
Figure 4-74 Add or Modify a Static Route Entry
150Mbps Wireless N Mini Pocket Router
- 85 -