Wisp Client Router Mode - TP-Link TL-WR710N User Manual

3. Click the Next button in Figure 3-19. You will then see the Finish page. Click the Reboot
button to make your wireless configuration take effect and finish the Quick Setup.

3.2.5 WISP Client Router Mode

When you choose WISP Client Router on Working Mode page in Figure 3-5 , take the following
steps:
1. Click Next, and then WAN Connection Type page will appear as shown in Figure 3-20.
The Router supports three popular ways PPPoE, Dynamic IP and Static IP to connect to the
Internet. To make sure the connection type your ISP provides, please refer to the ISP. Make sure
the cable is securely plugged into the WAN port before detection.
TL-WR710N
Figure 3-18 AP List
Figure 3-19 Quick Setup - Finish
Figure 3-20 Quick Setup – WAN Connection Type
150Mbps Wireless N Mini Pocket Router
- 23 -