Verifone ® Ruby Terminal Default Settings - Honeywell 1900GSR-2 User Manual

ACK/NAK Mode
ACK/NAK Mode On
®
Verifone
Scan the following Plug and Play code to program the scanner for a Veri-
fone Ruby terminal. This bar code sets the baud rate to 1200 bps and the
data format to 8 data bits, no parity bit, 1 stop bit. It also also adds a line
feed (LF) suffix and programs the following prefixes for each symbology:
2 - 6
Ruby Terminal Default Settings
Symbology
UPC-A
UPC-E
EAN-8
EAN-13
Verifone Ruby Settings
* ACK/NAK Mode Off
Prefix
A
A
FF
F