Application Work Group Selection; Resetting The Factory Defaults: All Application Work Groups - Honeywell 1900GSR-2 User Manual

Application Work Group Selection

This programming selection allows you to assign a scanner to a work group
by scanning the bar code below. You may then program the settings (e.g.,
beeper volume, prefix/suffix, data formatter) that your application requires.
Default = Group 0.
* Group 0
Group 2
Group 4
Group 6
Resetting the Factory Defaults:
All Application Work Groups
The following bar code defaults all of the work groups to the factory default set-
tings.
PAPDFT&
Factory Default Settings:
All Work Groups
Group 1
Group 3
Group 5
3 - 25