Remote Mastermind™ For Usb; Verifone ® Ruby Terminal Default Settings - Honeywell Xenon 1900 User Manual

Remote MasterMind™ for USB
When using a USB interface, you may wish to configure your scanner to com-
municate with Remote MasterMind Scanner Management Software (ReM).
Scan the ReM On bar code to communicate with ReM. To disable this capabil-
ity, scan ReM Off.
ReM Off
®
Verifone Ruby Terminal Default Settings
Scan the following Plug and Play code to program the scanner for a Verifone
Ruby terminal. This bar code sets the baud rate to 1200 bps and the data for-
mat to 8 data bits, no parity bit, 1 stop bit. It also adds a line feed (LF) suffix and
programs the following prefixes for each symbology:
2 - 6
Symbology
UPC-A
UPC-E
EAN-8
EAN-13
Verifone Ruby Settings
ReM On
Prefix
A
A
FF
F