Creative SB0350 Programming Manual page 95

6-10 DSP Commands
24h
Output
24h, wLength.LowByte, wLength.HighByte
Remarks
Input unsigned digitized sound data using single-cycle DMA mode. wLength is a
word giving the number of 8-bit samples less 1.
See Also
command 14h, 8-bit single-cycle DMA mode digitized sound output
Available 1.xx
2Ch
Output
2Ch
Remarks Input unsigned digitized sound data using auto-init DMA mode.
Refer to command 1Ch on how to terminate an auto-init transfer.
See Also
command 1Ch, 8-bit auto-init DMA mode digitized sound output
command DAh, Exit 8-bit auto-init DMA mode digitized sound I/O
Available 1.xx
8-bit single-cycle DMA mode digitized sound input
2.00 2.01+ 3.xx
8-bit auto-init DMA mode digitized sound input
2.00 2.01+ 3.xx
4.xx
4.xx