Creative SB0350 Programming Manual page 89

6-4 DSP Commands
The commands below are only available on DSP version 3.xx.
Category
Stereo control
The commands below are only available on DSP version 4.xx.
Category
Digitized sound I/O
sampling rate
8-bit DMA mode digitized
sound I/O
16-bit DMA mode digitized
sound I/O
Cmd# Description
A0h Set input mode to mono
A8h Set input mode to stereo
Cmd# Description
41h Set output sampling rate
42h Set input sampling rate
Cxh Program 8-bit DMA mode sound I/O
Bxh Program 16-bit DMA mode sound I/O
D5h Pause 16-bit DMA mode sound I/O
D6h Continue 16-bit DMA mode sound I/O
D9h Exit 16-bit auto-init DMA mode sound I/O