Creative SB0350 Programming Manual page 100

41h
Output
41h, wSamplingRate.HighByte, wSamplingRate.LowByte
Remarks
Valid sampling rates range from 5000 to 45 000 Hz inclusive.
Unlike the Time Constant, there is no need to pre-multiply the sampling rate by two
before programming the sampling rate for stereo digitized sound I/O.
See Also command 40h, Set digitized sound transfer Time Constant
command 42h, Set digitized sound input sampling rate
1.xx
Available
42h
Output
42h, wSamplingRate.HighByte, wSamplingRate.LowByte
Remarks
Refer to command 41h.
See Also
command 40h, Set digitized sound transfer Time Constant
Available 1.xx
Set digitized sound output sampling rate
2.00 2.01+ 3.xx
Set digitized sound input sampling rate
2.00 2.01+ 3.xx
DSP Commands
4.xx
4.xx
6-15