Creative SB0350 Programming Manual page 107

6-22 DSP Commands
A0h
Output
A0h
Remarks
The default input mode is mono.
See Also
command A8h, Set input mode to stereo
Available 1.xx
A8h
Output
A8h
Remarks
This command must be sent if stereo recording is desired. After recording, command
A0h must be sent to set the input mode back to mono.
This command no longer exists on DSP version 4.xx. Refer to commands Bxh and
Cxh on stereo recording settings.
See Also
command A0h, Set input mode to mono
Available 1.xx
Set input mode to mono
2.00 2.01+ 3.xx
Set input mode to stereo
2.00 2.01+ 3.xx
4.xx
4.xx