To Install The Card Executive - HP OmniBook 6000 - Notebook PC Evaluation Manual

1. Go to the APM directory and run Setup.exe.
2. Click the APM button to start installation.
3. Click OK.
4. When prompted, restart Windows NT. (If you wish to install Phoenix CardExecutive,
do not restart at this time.)

To install the Card Executive

To take advantage of Card Executive's plug-n-play for PCMCIA network cards, you
must install Card Executive before installing Windows NT networking.
Card Executive adds the following capabilities to your HP Notebook:
• Plug and Play for PC Cards using standard Windows NT drivers.
• Plug and Play for supported network PC Cards.
• Automatic configuration of PC Cards utilizing advanced "Wizard" technology to
allocate system resources.
• Suspend/Resume functions and simplified administration of PC Cards when
integrated with Phoenix APM.
1. Go to the PCCard directory and run Setup.exe
2. Click the Card Executive button to begin the installation process.
3. Click "I Understand" then click OK.
4. Click Restart Now and eject the CD.
5. After reboot, click Next to run the PC Card Diagnostics.
6. Make sure there are no PC Cards installed in the HP Notebook and click Next to start
the Diagnostics.
7. Click Finish to reboot.
After reboot, the PC Card icon appears on the Taskbar.
Using Windows NT 4.0
Installing Mobile Enhancements
Corporate Evaluator's Guide 139