Table of Contents
Advertisement
3.7 Gas Conversion: Procedures (cont.)
When converting from G20 (20 mbar) to G25 (25 mbar), or vice-versa, or G31 (37 mbar) to G31 (50
mbar), the following procedures apply:
• Check pilot adjustment and adjust as necessary.
• Other adjustments are not necessary.
Conversion from one gas family to another (e.g. changing from natural gas to propane) requires
special components and parts. Contact a Factory Authorized Service Agent for requirements and part
numbers.
Conversions can only be executed by qualified, factory-authorized personnel.
Vent tube connection
Pilot pressure adjustment
(remove cover screw to access)
Pilot gas supply connection.
KSCF18G COOL ZONE SERIES GAS FRYERS
CHAPTER 3: INSTALLATION INSTRUCTIONS
Pilot flow adjustment
Pressure flow adjustment
CE Gas Valve
Non-CE Gas Valve
Thermocouple connection
OFF Button
ON Button- Pilot Gas-flow
Pressure flow adjustment
(remove cover screw to access)
Regulator Vent
ON/OFF Gas-Cock Knob
3-10
Advertisement
Table of Contents
