initial setting :
system menu setting
SETTINGTHEBEEPSOUND(BEEPSOUND)
•
The beep sound function works in Camera/
Player/ M.Cam/ M.Player modes. ➥page 18
•
You can turn the beep sound on or off, when on,
each press of a button sounds a beep.
1. Set the Selectswitch to CARD or TAPE.
(VP-D385( i ) only)
2. Press the MODE button to set Camera(
Player(
).
3. Press the MENU button.
•
The menu list will appear.
4. Move theJoystick(▲ /▼) up or down to select
"System", then press the Joystick or move the
Joystick() to the right.
5. Move the Joystick(▲ /▼) up or down to select
"BeepSound", then press the Joystick.
6. Move theJoystick(▲ /▼) up or down to select
"On" or "Off", then press the Joystick.
7. To exit, press the MENU button.
When beep sound is set to off, the power
on/off sound is off.
26_ English
初始设置 : 系统菜单设置
设置蜂鸣音 (BEEPSOUND( 蜂鸣音 ))
MODE
CARD
TAPE
(VP-D385( i ) only)
BATT.
) or
Camera Mode
System
Clock Set
On
Remote
�
Beep Sound
On
�
On
Shutter Sound
�
English
Language
�
On
Demonstration
�
Move
Select
MENU
Camera Mode
System
Clock Set
Remote
Beep Sound
Off
On
Shutter Sound
✔
Language
Demonstration
Move
Select
MENU
•
在 Camera( 摄像 ) 模式 /Player( 播放 ) 模式
/M.Cam( 存储卡摄像 ) 模式 / M.Player
( 存储卡播放 ) 模式下使用蜂鸣音。➥ 第 18 页
•
您可以打开或关闭蜂鸣音,当设置为打开时,每
次按下按钮都会听到蜂鸣音。
1.切换存储介质为 CARD 或 TAPE。
( 仅限 VP-D385( i ))
2.按下 MODE 按钮设置为 Camera( 摄像 ) 模式
(
) 或 Player( 播放 ) 模式 (
3.按下 MENU 按钮。
•
屏幕上显示菜单列表。
4.向上或向下拨动操纵杆 (▲ /▼) 选择
"System( 系统 )",然后按下操纵杆或者向右拨
动操纵杆 () 确认选择。
5. 向上或向下拨动操纵杆 (▲ /▼) 选择
"BeepSound( 蜂鸣音 )", 然后按下操纵杆确认。
6.向上或向下拨动操纵杆 (▲ /▼) 选择
"On( 打开 )" 或 "Off( 关闭 )",然后按下操纵杆
确认。
Exit
7.若要退出菜单,按下 MENU 按钮。
当蜂鸣音设置为关闭时,您将听不到电源打
开 / 关闭的声音。
Exit
)。
中文 _26