Samsung VP-D381( i ) User Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Camcorder
  5. VP-D381( i )
  6. User manual
Samsung VP-D381( i ) User Manual

Samsung VP-D381( i ) User Manual

Digital video camcorder
Hide thumbs Also See for VP-D381( i ):
Table of Contents

Advertisement

Quick Links

Digital Video Camcorder

user manual

imagine
the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/global/register
VP-D381( i )
VP-D382( i )
VP-D382H
VP-D384
VP-D385( i )

Advertisement

Table of Contents
loading

Related Manuals for Samsung VP-D381( i )

Summary of Contents for Samsung VP-D381( i )

  • Page 1: User Manual

    Digital Video Camcorder user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/global/register VP-D381( i ) VP-D382( i ) VP-D382H VP-D384 VP-D385( i )
  • Page 2 FEATURESOFYOURNEWMINIDVCAMCORDER  Digital Data Transfer Function with IEEE1394 By incorporating the IEEE 1394 (i.LINK™: i.LINK is a serial data transfer protocol and interconnectivity system, used to transmit DV data) high speed data transport port, both moving and...

  • Page 3: Safety Warnings

    Please follow them explicitly. After reading this section, keep it in a safe place for future reference. precautions • This camcorder should always be connected to an AC outlet with a protective grounding connection. • Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

  • Page 4: Notes And Safety Instructions

    LCD screen. These dots are normal and do not affect the recorded picture in any way. Do not pick up the camcorder by holding the LCD screen or battery pack. •...
  • Page 5 - When you move the camcorder from a cold location to a warm location (e.g. from outside to inside during the winter.) - When you move the camcorder from a cool location to a hot location (e.g. from inside to outside during the summer.) If the (DEW) protection feature is activated, leave the camcorder for at least two hours in a dry, warm room with •...

  • Page 6: Table Of Contents

    YOUR MINIDV CAMCORDER PREPARATION INITIAL SETTING : SYSTEM MENU SETTING 02_ English What is included with your miniDV camcorder Front & left view Left side view Right & top view Rear & bottom view Using the remote control (VP-D382( i )/D382H/D385( i ) only) Using the hand strap &...
  • Page 7 INITIAL SETTING : DISPLAY MENU SETTING BASIC RECORDING ADVANCED RECORDING Setting the guideline (guideline) Adjusting the LCD screen (LCD Bright/LCD Colour) Displaying the date/time (Date/Time) Setting the tv display (TV display) Inserting / ejecting a cassette Various recording techniques Making your first recording Recording with ease for beginners (EASY.Q mode) Zooming in and out Searching quickly for a desired scene...

  • Page 8: Digital Still Camera Mode

    Setting the AV in/out (AV In/Out) (VP-D381i/D382i/D385i only) Tape playing back on a TV screen Copying a camcorder tape onto a video tape Using the VOICE + function Recording (copying) a TV programme or video tape onto a camcorder tape (VP-D381i/D382i/D385i only)
  • Page 9 Installing the software (DV Media Pro programme) Connecting to a PC 100 After finishing a recording 100 Usable cassette tapes 101 Cleaning and maintaining the camcorder 102 Using your miniDV camcorder abroad 103 Troubleshooting 105 Setting menu items English _05...

  • Page 10: Getting To Know

    Parts and accessories are available at your local Samsung dealer. • (Option) : This is an optional accessory. To buy this one, contact your nearest Samsung dealer. • A memory card is not included. See page 74 for memory cards compatible with your miniDV camcorder.
  • Page 11 FRONT&LEFTVIEW Lens Remote sensor (VP-D382( i )/D382H/D385( i ) only) Light (VP-D382( i )/D382H/D384/D385( i ) only) OPEN switch Be careful not to cover the internal microphone and lens during recording. CAUTION O P E N EASY Q button ➥page 36 Display ( ) button TFT LCD screen...

  • Page 12: Left Side View

    LEFTSIDEVIEW M E N U MENU button joystick ( / /  / / Select), (W/T) ➥page 23 Recording start/stop button jack cover (AV/DV jack) When you close LCD panel with the LCD screen facing out, joystick (// /) function works reversely.

  • Page 13: Right & Top View

    RIGHT&TOPVIEW Zoom(W/T) / Volume (VOL) lever PHOTO button ➥page 60,78 Recording start/stop button POWER switch P O W C H G jack cover (DC IN, USB (VP-D385( i ) only) jack) Cassette compartment cover Hand strap English _09...

  • Page 14: Rear & Bottom View

    REAR&BOTTOMVIEW MODE POWER DC IN AV jack MODE button Mode indicator (Camera DC IN jack DV (IEEE1394) jack Charging (CHg) indicator USB jack (VP-D385( i ) only) Memory card slot (VP-D385( i ) only)
  • Page 15 PHOTO SEARCH button ➥page 61 A.DUB button ➥page 65 (FF) button (REW) button (PLAY) button The buttons on the remote control function the same as those on the miniDV camcorder. ( i ) ( i ) /D382H/D385 ONLY) (-) / (+) (Direction) button ➥page 64...

  • Page 16: Preparation

    This section provides information on using this miniDV camcorder: such as how to use the provided accessories, how to charge the battery, how to set up the operation and screen indicators in each mode. USINGTHEHANDSTRAP&LENSCOVER It is very important to ensure that the hand strap has been correctly adjusted before you begin your recording.

  • Page 17: Installing The Button-Type Battery

    INSTALLINGTHEBUTTON-TYPEBATTERY Button-type battery installation for the remote control (VP-D382 /D382H/D385 ( i ) ( i ) 1. Pull out the button-type battery holder toward the direction of the arrow. 2. Position the button-type battery in the button-type battery holder, with the positive ( ) terminal face up.

  • Page 18: Using The Battery Pack

    It is recommended that you purchase one or more additional battery packs to allow continuous use of your miniDV camcorder. Use only Samsung-approved battery packs. Do not use batteries from other manufacturers. Otherwise, there is a danger of overheating, fire or explosion.

  • Page 19: Charging Indicator

    • The time is only for reference. Figures shown in the table are measured under Samsung’s test environment, and may differ from your actual use. • The recording time shortens dramatically in a cold environment. The continuous recording times in the operating instructions are measured using a fully charged battery pack at 25 °C (77 °F).

  • Page 20: Battery Level Display

    40~80% used d. 80~95% used e. Completely used (Blinking) (The Camcorder will turn off soon, change the battery as soon as possible.) Battery Pack Management • The battery pack should be recharged in an environment between 0 °C (32 °F) and 40°C (104 °F).

  • Page 21: Connecting A Power Source

    To preserve battery power, keep your camcorder turned off when you are not operating it. • If your camcorder is in Camera mode, and it is left in STBY mode without being operated for more than 5 minutes with a tape inserted, it will automatically turn itself off to protect against unnecessary battery discharge.

  • Page 22: Basic Minidv Camcorder Operation

    BASICMINIDVCAMCORDEROPERATION Turning the miniDV camcorder on and off You can turn the camcorder on or off by sliding the POWER switch downward. • Slide the POWER switch repeatedly to toggle the power on or off. Setting the operating modes •...

  • Page 23: Screen Indicators In Camera/Player Modes

    SCREENINDICATORSINCAMERA/PLAYERMODES 0:00:00 STBY No Tape ! 1/50 C.Nite 1/25 00:00 1.JAN.2008 16:9 Wide 10Sec 0:00:46:06 STOP Sound[2] No Tape ! [11] 00:00 1.JAN.2008 OSD in Camera Mode Battery Level ➥page 16 Tele Macro * ➥page 54 Tape photo recording ➥page 60 / 60min Self timer * ➥page 39 (VP-D382( i )/D382H/D385( i ) only)

  • Page 24: Screen Indicators In M.cam/M.player Modes (Vp-D385( I ) Only)

    • Functions marked with * will not be retained when the miniDV camcorder is powered on after turning it off. Time counter (movie recording time) File number of the moving image Volume Control ➥page 86...

  • Page 25: Using The Display ( ) Button

    USINGTHEDISPLAY( You can switch between the on-screen information display modes: Press the Display ( Switching the information display mode You can switch between the on-screen information display modes: Press the Display ( ) button. The full and minimum display modes will alternate. •...

  • Page 26: Using The Joystick

    preparation USINGTHEJOYSTICK Used for playback, pausing, fast forwarding, and rewinding. Also used as directional buttons (up, down, left, right) and to make a selection when selecting movie, photo images or menus. 1. Move the Joystick ( ) up or down. 2.
  • Page 27 HANDLINGQUICKMENUSWITHTHEJOYSTICK QuickMenuInCamera/Playermodes Joystick Camera( )Mode Status Input  Exposure  Focus  Shutter  Return / Selection / Exit the menu QuickMenuInM.Cam/M.Playermodes(VP-D385 Joystick M.Cam( )Mode Status Input  Exposure  Focus   Return/ Selection/Exit the menu STOP Fade PLAY M.Player( )Mode(Movieimages) STOP...

  • Page 28: Setting The Clock (Clock Set)

    Clock setup works in Camera / Player / M.Cam / M.Player modes. ➥page 18 • Set the date and time when using this camcorder for the first time. 1. Set the Select switch to CARD or TAPE. (VP-D385( i ) only) 2.

  • Page 29: Setting The Wireless Remote Control Acceptance (Remote)

    • The remote function allows you to enable or disable the remote control for use with the camcorder. 1. Set the Select switch to CARD or TAPE. (VP-D385( i ) only) 2. Press the MODE button to set Camera ( 3.

  • Page 30: Setting The Beep Sound (Beep Sound)

    initial setting : system menu setting SETTINGTHEBEEPSOUND(BEEPSOUND) • The beep sound function works in Camera / Player / M.Cam / M.Player modes. ➥page 18 • You can turn the beep sound on or off, when on, each press of a button sounds a beep.

  • Page 31: Setting The Shutter Sound (Shutter Sound)

    SETTINGTHESHUTTERSOUND(SHUTTERSOUND) • The shutter sound function works in Camera / Player / M.Cam modes. ➥page 18 • You can turn the shutter sound on or off, when on, with each press of the PHOTO button, the shutter will sound. 1. If you press the MODE button to set it to Camera ( either CARD or TAPE.

  • Page 32: Selecting The Osd Language (Language)

    initial setting : system menu setting SELECTINGTHEOSDLANGUAGE(LANGUAGE) • The Language function works in Camera / Player / M.Cam / M.Player modes. ➥page 18 • You can select the desired language to display the menu screen and the messages. 1. Set the Select switch to CARD or TAPE. (VP-D385( i ) only) 2.

  • Page 33: Viewing The Demonstration (Demonstration)

    The demonstration function may only be used in the Camera mode without a tape inserted in the camcorder. ➥page 18 • Before you begin: Make sure that there is no tape inserted in the camcorder. ➥page 34 • The demonstration operates repeatedly until the demonstration mode is switched off.

  • Page 34: Initial Setting : Display Menu Setting

    • The miniDV camcorder provides 3 types of guidelines. 1. Set the Select switch to CARD or TAPE. (VP-D385( i ) only) 2. Press the MODE button to set Camera ( 3.

  • Page 35: Adjusting The Lcd Screen (Lcd Bright/Lcd Colour)

    Adjusting the LCD screen works in Camera / Player / M.Cam / M.Player modes. ➥page 18 • Your camcorder is equipped with a 2.7 inch wide colour Liquid Crystal Display (LCD) screen, which enables you to view what you are recording or playing back directly. •...

  • Page 36: Displaying The Date/Time (Date/Time)

    AC power adaptor or while the battery pack is attached. The rechargeable battery will be fully discharged in about 3 months if you do not use your camcorder at all. Use your camcorder after charging the built-in rechargeable battery. If the built-in rechargeable battery is not charged, any input data will not be backed up and the date/time appears on the screen as "00:00 1.JAN.2008"...

  • Page 37: Setting The Tv Display (Tv Display)

    SETTINGTHETVDISPLAY(TVDISPLAY) • The TV Display function works in Camera / Player / M.Cam / M.Player modes. ➥page 18 • You can select the output path of the OSD (On Screen Display). - "Off": The OSD appears in the LCD screen only. - "On": The OSD appears in the LCD screen and TV.

  • Page 38: Basic Recording

    • Making a recording viewing the LCD screen from the front. Please rotate the LCD screen carefully as excessive rotation may cause damage to the inside of the hinge that connects the LCD screen to the camcorder. 34_ English OPEN...

  • Page 39: Making Your First Recording

    Eject the battery pack when you finish the recordings to prevent unnecessary battery power consumption. • The miniDV camcorder provides two Recording start/stop buttons. One is on the rear side of the camcorder and the other one is on the LCD panel. Select the Recording start/stop button according to the use. ➥...

  • Page 40: Recording With Ease For Beginners (Easy.q Mode)

    The EASY Q function works only in Camera mode. ➥page 18 • With the EASY Q function, most of the miniDV camcorder settings are automatically adjusted, which frees you from making detailed adjustments. 1. Set the Select switch to TAPE. (VP-D385( i ) only) 2.

  • Page 41: Zooming In And Out

    Optical zoom preserves the movie quality, but during digital zoom the quality of image may suffer. • When you zoom into a subject close to the lens, the miniDV camcorder may automatically zoom out depending on the distance to the subject. In this case, set "Macro" to "On." ➥page 54 on the LCD panel.)
  • Page 42 basic recording SEARCHINGQUICKLYFORADESIREDSCENE(SETTINGTHEZEROMEMORY) (VP-D382(i)/D382H/D385(i)only) • The zero memory function works in both Camera and Player modes. ➥page 18 • You can mark a point on a tape that you want to return to following playback. 1. Set the Select switch to TAPE. (VP-D385( i ) only) 2.

  • Page 43: Self Record Using The Remote Control (Setting The Self Timer) (Vp-D382( I )/D382H/D385( I ) Only)

    If you want to cancel the self timer function before recording, press the SELF TIMER button again. • Do not obstruct the remote control sensor by putting obstacles between the remote control and miniDV camcorder. • The remote control maximum range is 4 to 5m (13 to17 ft). •...
  • Page 44 basic recording REVIEWINGANDSEARCHINGARECORDING • The Rec Search function works only in Camera mode. ➥page 18 • Used to review previously recorded images or to find a point to record a new image in the STBY mode. Record Search (Joystick) 1. Set the Select switch to TAPE. (VP-D385( i ) only) 2.

  • Page 45: To Start Recording

    USINGTHEFADEONANDOFF • The Fade function works only in Camera mode. ➥page 18 • You can give your recording a professional look by using special effects such as fade in at the beginning of a sequence or fade out at the end of a sequence. To Start Recording 1.
  • Page 46 • In the following situations, you may obtain better results by adjusting the focus manually. a. A picture containing several objects, some close to the camcorder, others further away. b. A person enveloped in fog or surrounded by snow. c. Very shiny or glossy surfaces like a car.
  • Page 47 The image may not seem as smooth when a high shutter speed is set. • The camcorder returns to the auto shutter and auto exposure settings when you change to the EASY.Q mode. • When recording with a shutter speed of 1/1000 or higher, make sure the sun is not shining into the lens.

  • Page 48: Advanced Recording

    • Record using SP mode for best picture and sound quality. To edit audio on your camcorder, you must set 12Bit for the Audio mode and SP for the Rec mode. CAUTION 44_ English ( i )
  • Page 49 CUTTINGOFFWINDNOISE(WINDCUTPLUS) • The windcut plus function works in both Camera and Player (Audio dubbing) modes. ➥page 18 • Use the windcut plus when recording in windy places such as the beach or near buildings. • The windcut plus function minimises wind or other noises while recording. - When the windcut plus is on, some low pitched tones are eliminated along with the sound of the wind.
  • Page 50 advanced recording SELECTINGTHEREALSTEREOFUNCTION(REALSTEREO) • The Real Stereo function works only in Camera mode. ➥page 18 • Real stereo enhances the left and right input signals when using the internal microphone. 1. Set the Select switch to TAPE. (VP-D385( i ) only) 2.
  • Page 51 SETTINGTHEPROGRAMAE(PROGRAMAE) • The Program AE function works only in Camera mode. ➥page 18 • The Program AE mode allows you to adjust shutter speeds and apertures to suit different recording conditions. • They give you creative control over the depth of field. 1.
  • Page 52 advanced recording SETTINGTHEPROGRAMAE(PROGRAMAE) Settings - Auto balance between the subject and the background. - To be used in normal conditions. Auto - The shutter speed is automatically adjusted from 1/50 to 1/250 per second, depending on the scene. - Reduces blurring when recording rapidly moving subjects such as in golf or tennis Sports games.
  • Page 53 SETTINGTHEWHITEBALANCE(WHITEBALANCE) • The White Balance function works in both Camera and M.Cam modes. ➥page 18 • The White Balance is a recording function that preserves the unique image colour of the object in any recording condition. • You may select the appropriate White Balance mode to obtain good quality image colour.

  • Page 54: Setting The White Balance Manually

    advanced recording Settings Auto This option is generally used to control the white balance automatically. This controls the white balance according to the outdoor ambience, especially for Daylight close up and when the subject is of one dominant colour. Cloudy This option is used when you make a recording in cloudy weather.
  • Page 55 APPLYINGVISUALEFFECTS(VISUALEFFECT) • The visual effect function works only in Camera mode. ➥page 18 • The visual effects enable you to give a creative look to your recording. • Select the appropriate visual effect for the type of picture that you wish to record and the effect you wish to create.
  • Page 56 advanced recording Settings Disables the function. 1Art This mode gives the images a coarse effect. 2Mosaic This mode gives the images a mosaic effect. 3Sepia This mode gives the images a reddish-brown pigment. 4Negative This mode reverses the colours, creating a negative image. 5 Mirror This mode cuts the picture in half, using a mirror effect.
  • Page 57 Setting the 16:9 Wide mode (16:9 Wide) • The 16:9 wide function works only in Camera mode. • Recordings in 16:9 wide will play back naturally only when the TV supports 16:9 aspect ratio. • This product is set to 16:9 wide by the factory default. 1.
  • Page 58 advanced recording USing the tele macro (macro) • Tele Macro function works in both Camera and M.Cam mode. • Effective focal distance in Tele Macro mode is 50 cm (19.7 inches) to 100 cm (39.4 inches). 1. Set the Select switch to CArD or TAPE. (VP-D385( i ) only). 2.
  • Page 59 The DIS function works only in Camera mode. • DIS (Digital Image Stabilizer) is a function that compensates for any shaking or hand movement while holding the camcorder (within reasonable limits). • It provides more stable pictures when: - Recording with the zoom...
  • Page 60 advanced recording USing back light compenSation mode (blc) • BLC works in both Camera and M.Cam modes. • Back lighting exists when the subject is darker than the background: - The subject is in front of a window. - The person to be recorded is wearing white or shiny clothes and is placed against a bright background;...

  • Page 61: Selecting The Digital Zoom

    zooming in and oUt With digital zoom (digital zoom) • Maximum Digital Zoom works only in Camera mode. • You can select the maximum zoom level in case you want to zoom to a level greater than 34x (the default setting) during recording. Up to 34x zoom is performed optically, and after that, up to 1200x zoom is performed digitally.
  • Page 62 advanced recording USing the coloUr nite (c.nite) • C.Nite function works only in Camera mode. • You can take a shot of an object in slow motion by controlling the shutter speed, or a brighter image in dark places without compromising colours. 1.
  • Page 63 Do not touch it while in operation or soon after turning it off, otherwise WArNING serious injury may occur. • Do not place the camcorder into the carrying case immediately after using the light, since it remains extremely hot for some time. • Do not use near flammable or explosive materials.
  • Page 64 " is displayed on the LCD screen, the photo image is recorded for about 6~7 seconds. 4. After the photo image has been recorded, the camcorder returns to its previous mode. • Tape Photo Recording is recorded for about six or seven seconds, and your camcorder returns to the standby mode.
  • Page 65 • The photo search process appears while you are searching. • After completing the search, the camcorder displays the tape photo image. • When there are no photo images recorded on the tape, it will be fully rewound or forwarded.

  • Page 66: Playing Back A Tape On The Lcd Screen

    - If you close the LCD screen while playing, you will not hear sound from the speaker. • When the Audio/Video cable is connected to the camcorder, you cannot hear sound from the built-In speaker and cannot adjust the volume.

  • Page 67: Various Functions While In Player Mode

    The F.ADV (Frame advance), X2 and SLOW buttons are located on the remote control only. (VP-D382( i )/D382H/D385( i ) only) • To prevent tape and head-drum wear, your camcorder will automatically stop if it is left in pause or slow modes for more than 3 minutes. Playback/Pause •...
  • Page 68 playback Frame Advance (To play back frame by frame) (VP-D382( i )/D382H/D385( i ) only) • Press the F.ADV button on the remote control while in pause mode. - Video sequence advances frame by frame each time you press the F.ADV button or - The F.ADV function works in pause mode only.
  • Page 69 (vp-d382( i )/d382h/d385( i ) only) • This feature enables you to dub your voice through the internal microphone or other audio equipment onto a pre-recorded camcorder tape. The original sound on the tape will not be erased. •...
  • Page 70 playback dUbbed aUdio playback (aUdio Select) • The dubbed Audio playback function works only in Player mode. 1. Set the Select switch to TAPE. (VP-D385( i ) only). 2. Press the MODE button to set Player ( 3. Insert the dubbed tape and press the MENU button. •...

  • Page 71: Audio Effect

    aUdio eFFect • Audio effect function works only in Player mode. • Audio effect provides various playback effects to audio signals stored on a tape. 1. Set the Select switch to TAPE. (VP-D385( i ) only) 2. Press the MODE button to set Player ( 3.
  • Page 72 "Out" or "In", then press the ▲ ▼) Joystick. • "Out": Select this when copying or playing back the contents of this camcorder onto the external device. • "In": Select this when recording the contents of an external device to the camcorder.
  • Page 73 TV to Video. • Refer to the TV user’s manual. 5. Play the tape. ➥page 70 If you connect the cable to the AV jack, you will not hear sound from the camcorder's speaker. Signal flow Camcorder AV Jack...
  • Page 74 Connecting to a TV that has no Audio/Video Input Jacks • You can connect your camcorder to a TV through a VCR. 1. Connect the camcorder to your VCR with the Audio/Video cable. • The yellow jack: Video •...
  • Page 75 The copying function works only in Player Mode. • Connect your camcorder to a VCR using the AV jack to copy the recording from a camcorder tape onto a VCR tape. • Set the "AV In/Out" to "Out" before copying to an external device. (VP-D381i/D382i/D385i only) 1.
  • Page 76 When you want to play back or record a tape-recorded movie on other AV device, you can transfer the voice sound incoming from the internal microphone of your camcorder, instead of the audio signals on a prerecorded tape. 1. Connect the provided Audio/Video cable to the AV Jack of the camcorder.
  • Page 77 The recording (copying) function works only in Player mode. ➥ page 18 • Connect your camcorder to a VCR or a TV using the AV jack to record a TV programme or copy a video tape onto a camcorder tape.

  • Page 78: Memory Card Functions

    (VP-D385 USing a memory card (USable memory card) (not SUpplied) • This camcorder can use SD memory cards and MMC (Multi Media Cards). Some cards are not compatible depending on the memory card manufacturer and memory card type.

  • Page 79: Structure Of Folders And Files On The Memory Card

    After removing the memory card from the camcorder, keep it in a soft case to prevent static shock. • The data stored on the memory card may be changed or lost as a result of misuse, static electricity, electric noise or repair. Save important images separately. Samsung is not responsible for data loss due to misuse. •...

  • Page 80: Image Format

    Up to 99 files are created in one folder. New folder is created when more than 99 files are created. • You may modify the name of a file/folder stored in the memory card) using a PC. This camcorder may not recognise modified files. Number of Images on the Memory Card Photo Size...
  • Page 81 Setting the File nUmber (File no.) • File number setting works only in M.Cam mode. • File numbers are given to images in the order they were recorded when they are stored on the memory card. • File numbers may be set as follows: - "Series": When there are existing files, the new image will be named as the next number in the sequence.
  • Page 82 digital still camera mode (VP-D385 taking a photo image (Jpeg) on the memory card • You may take photo images while in M.Cam mode and store the images on the memory card. page 18 ➥ • You can take photo images using the remote control. 1.

  • Page 83: To View A Single Image

    vieWing photo imageS (Jpeg) • This function works only in M.Player mode. You can play back and view photo images recorded on the memory card. • Be sure that the M.Play Select is set to Photo in the menu. 1. Set the Select switch to CArD. 2.
  • Page 84 The Protection function works only in M.Player mode. • You can protect important images from accidental erasure. If you format the camcorder, all images including protected images will be erased. 1. Set the Select switch to CArD. 2. Press the MODE button to set Player ( •...

  • Page 85: Using The Joystick

    deleting photo imageS and moving imageS (delete) • The Delete function works only in M.Player mode. • You can erase the photo images and moving images recorded on the memory card. • To delete a protected image, first cancel image protection. •...

  • Page 86: Deleting All Images At Once

    digital still camera mode (VP-D385 Deleting All Images at Once 1. Set the Select switch to CArD. 2. Press the MODE button to set Player ( • The last recorded image appears. • If there are no recorded images on the memory card, "No image!" is displayed. 3.

  • Page 87: Formatting A Memory Card (Format)

    Formatting a memory card (Format) • The format function works only in M.Player mode. • You can use the format functions to completely delete all images and options on the memory card, including protected images. • The format function restores the memory card to its initial state. 1.
  • Page 88 digital still camera mode (VP-D385 recording moving imageS (mpeg) on a memory card • You may record moving images while in M.Cam mode and store the images on a memory card. • You can record moving images with audio on a memory card. •...
  • Page 89 MPEG files (moving images) can be recorded up to 2 GB per a moving file. • Before using the recording a moving image function, check whether the memory card is inserted into the camcorder. • MENU button is not available while recording a moving image. To use MENU button, stop recording.
  • Page 90 The moving images that you recorded on the memory card may not play on other manufacturer’s equipment. • The moving images recorded by another camcorder may not play on this camcorder. • To play back moving images on a PC, the video codec (in the CD provided with the camcorder) should be installed.

  • Page 91: Recording An Image From A Tape As A Photo Image

    • This function works only in Player mode. • Your camcorder can read moving image data recorded on a tape, and record it as a photo image on a memory card. Before operation Insert a recorded tape and a memory card into your camcorder.
  • Page 92 The photo copy function works only in Player mode. • Using the search function, you can automatically take in only photo image from tapes recorded in your miniDV camcorder and record them on a memory card in sequence. Before operation •...

  • Page 93: Removing The Print Mark

    For printing (print mark) • The print mark function works only in M.Player mode. • This camcorder supports the DPOF (Digital Print Order Format) print format. • You can automatically print images recorded on a memory card with a printer supporting DPOF.

  • Page 94: Connecting To A Printer

    • With the PictBridge support, you can control the printer directly through your camcorder in order to print out stored pictures. For direct printing of your stored pictures using the PictBridge function, you must connect your camcorder to a PictBridge printer using a USB cable.

  • Page 95: Selecting Images

    • Use the USB cable provided with the camcorder. • Use the AC power adapter for your camcorder during PictBridge Direct Printing. Turning your camcorder off during printing might damage data on the memory card. • Printing photo images is supported. Moving images are not available for printing.

  • Page 96: Ieee 1394 Data Transfer

    Refer to the product documentation of the device to be connected for further details on notes and compatible software applications. Please be careful since there are two types of DV jacks (4pin, 6pin). This camcorder has a 4pin jack. WArNING 92_ English 98SE, ME, 2000, XP, VISTA, Mac OS (9.1~10.4)

  • Page 97: Recording With A Dv Connection Cable

    Do not use another DV device when using IEEE1394. • Do not connect the camcorder to a PC using both DV and USB (VP-D385( i ) only) cables. It may not operate properly. • The IEEE1394 cable (DV cable) is sold separately.

  • Page 98: Using Usb Interface

    Transferring a Digital Image through a USB Connection • The camcorder supports both USB 1.1 and 2.0 standards. (Depends on the PC specification) • You can transfer a recorded file on a Memory Card to your PC via a USB connection.
  • Page 99 If no memory card or an unformatted memory card is inserted, PC will not recognise your camcorder as a removable disk. • If you disconnect the USB cable from the PC or the camcorder during the data transfer, the data transfer will stop and the data may be damaged. •...

  • Page 100: Selecting The Usb Device (Usb Connect)

    USB connect function works only in M.Player mode. • Using the USB cable, you can connect your camcorder to a computer to copy your moving images and photo images from the memory card, or to a printer to print your images.

  • Page 101: Before You Start

    Click on "Video Codec" on the setup screen. Video Codec is required to play movie files recorded by this miniDV camcorder on a PC. • Please install by using the Software CD that came with this camcorder. We do not guarantee compatibility with other CDs. •...

  • Page 102: Connecting To A Pc

    1. Set the Select switch to CArD. 2. Press the MODE button to set Camera ( 3. Connect one end of the USB cable to the USB jack on the camcorder and the other end to the USB jack on your computer.
  • Page 103 1. Set the Select switch to TAPE. 2. Press the MODE button to set Camera ( 3. Connect one end of the USB cable to the USB jack on the camcorder and the other end to the USB connector on your computer.

  • Page 104: After Finishing A Recording

    Pull the cassette compartment out automatically. • Please wait while the tape is completely ejected. 2. After removing the tape, close the compartment cover and store the camcorder in a dust free environment. Dust and other foreign materials can cause square-shaped noise or jerky images.

  • Page 105: Cleaning And Maintaining The Camcorder

    Clean the video heads with a dry type cassette cleaner. • Some cleaning cassette products stop automatically. Refer to the cleaning cassette’s instructions for detailed information. If the problem continues after the cleaning, consult your nearest Samsung dealer or Authorised Service Centre. (blue screen) page 18 ➥...

  • Page 106: Power Sources

    The provided AC adaptor features automatic voltage selection in the AC range from 100 V to 240 V. You can use your camcorder in any countries/regions using the AC power adaptor supplied with your camcorder within the AC 100 V to 240 V, 50/60 Hz range.

  • Page 107: Troubleshooting

    • Before contacting a Samsung authorised service centre, perform the following simple checks. They may save you the time and expense of an unnecessary call. Self diagnosis display Display Blinking slow The battery pack is almost discharged. Tape end! slow When the remaining time on the tape is about 2 minutes.

  • Page 108: Moisture Condensation

    If the camcorder is brought directly from a cold place to a warm place, moisture may condense inside the camcorder, on the surface of the tape, or on the lens. In this condition, the tape may stick to the head drum and be damaged or the unit may not operate correctly.

  • Page 109: Setting Menu Items

    Setting menU itemS Main Menu Sub Menu Camera Program AE Selecting the Program AE Function White Balance Setting the White Balance Visual Effect Setting the Digital special effect 16:9 Wide Setting the 16:9 Wide Function Macro Setting the Macro Function Selecting the Digital Image Stabilizing Setting the BLC Function Digital Zoom...
  • Page 110 • The displays in this user manual may not be exactly the same as those you see on the LCD screen. • Designs and specifications of the camcorder and other accessories are subject to change without any notice. • This user manual covers the complete range of VP-DXXX digital video camcorders including non DV(IEEE1394)/AV(Analog) In and DV(IEEE1394)/AV(Analog) In versions of the same models.

  • Page 111: Specifications

    specifications model name: vp-d381( System video signal video recording system 2 rotary heads, Helical scanning system audio recording system Rotary heads, 12/16b PCM system Usable cassette Digital video tape (6.35mm width): Mini DV cassette tape speed SP: approx. 18.83mm/s tape recording time SP: 60 minutes (when using DVM 60), LP: 90 minutes (when using DVM 60) Approx.
  • Page 112 The mains lead on the power adapter is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BS1362 of the same rating must be used.
  • Page 113 UNITED KINGDOM This Samsung product is warranted for the period of twelve (12) months from the original date of purchase, against defective materials and workmanship. In the event that warranty service is required, you should return the product to the retailer from whom it was purchased.
  • Page 114 μηνών από την ημερομηνία αγοράς του για ανταλλακτικά και εργατικά. Στην περίπτωση που θα χρειαστεί επισκευή, το προϊόν αυτό της SAMSUNG θα πρέπει να σταλεί ή να μεταφερθεί στο εξουσιοδοτημένο serνice, με έξοδα του αγοραστή. Εξουσιοδοτημένοι αντιπρόσωποι και εξουσιοδοτημένα κέντρα...
  • Page 115 Β. Επισκευή που έγινε από μη εξουσιοδοτημένα συνεργεία service Γ. Ατυχήματα, θεομηνίες ή οποιαδήποτε αιτία πέρα του ελέγχου της SAMSUNG, συμπεριλαμβανομένων αλλά μη περιορισμένων των κεραυνών, του νερού, της φωτιάς, των δημοσίων αναταραχών, του κακού αερισμού κ.λπ. Δ. Η εγγύηση αυτή δεν επηρεάζει τα δικαιώματα του...
  • Page 116 SAMSUNG world wide If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Region Country CANADA North America MEXICO U.S.A ARGENTINE BRAZIL CHILE NICARAGUA HONDURAS COSTA RICA ECUADOR EL SALVADOR Latin America...
  • Page 117 roHS compliant Our product complies with “The Restriction of the Use of Certain Hazardous Substances in Electrical And Electronic Equipment”, and we do not use the 6 hazardous materials- Cadmium(Cd), Lead (Pb), Mercury (Hg), Hexavalent Chromium (Cr +6 ), Poly Brominated Biphenyls code no.

This manual is also suitable for:

Vp-d382( i )Vp-d382hVp-d384Vp-d385( i )Vp-d381iVp-d382i ... Show all

Table of Contents