Table of Contents
Advertisement
KSCFH18E COOL ZONE SERIES ELECTRIC FRYERS
4.4 Filtering (cont.)
1.
If using solid shortening, clear return lines before turning off the filter motor by allowing the
pump to run for approximately 10-15 seconds once air bubbles appear in the frypot from the
oil return line. Failure to do so will allow solid shortening to cool, solidify and clog the
lines.
See Chapter 6 for detailed filtration procedures.
4.5 Closing
1.
When closing at night, filter shortening in all fryers and drain the filter lines. Cover the
open tanks of oil. Turn the computer "OFF".
4.6 Shutdown
1.
When shutting down for periods longer than overnight, drain shortening and clean the frypot
thoroughly. Either discard the shortening or return it filtered to the frypot and then cover it.
Turn the computer "OFF".
CHAPTER 4: DAILY OPERATION
4-2
Advertisement
Table of Contents
Troubleshooting
