Frymaster FLYMASTER KSCFH18E Installation & Operation Manual page 10

KSCFH18E COOL ZONE SERIES ELECTRIC FRYERS
2.3 Pre-Installation
a. GENERAL: All installation and service on this equipment must be performed by qualified,
certified, licensed, and/or authorized installation or service personnel. A list of Frymaster
Authorized Service Centers was included with the fryer when shipped from the factory.
If you do not have access to this list, please contact the Frymaster/Dean Technical Services
department using the phone number listed on the front of this manual.
NOTE: Failure to use qualified service personnel will void the Frymaster warranty.
b. STANDARDS:
grounded in accordance with local codes, or in the absence of local codes, with the latest
editions of:
1. United States of America:
National Electric Code Standards ANSI/ NFPA #70.
American National Standards Institute
1430 Broadway
New York, NY 10018
NFPA Standards #96 and #211.
National Fire Protection Association
470 Atlantic Avenue
Boston, MA 02110
2. Canada: Canadian Electrical Code Part 1, CSA-C22.1.
Canadian Standards Association
178 Rexdale Boulevard
Rexdale, ONT
M9W 1R3
3. European Community (CE):
connected and grounded in accordance with local codes, or in the absence of local
codes, with the latest editions of the appropriate national or European Community (CE)
standards
2.4 Unpacking the Fryer/Component Systems
Ensure the container is upright. Unpack the fryer carefully and remove all accessories from the
carton. Do not discard or misplace these, as they will be needed.
After unpacking, immediately check the equipment for visible signs of shipping damage. If such
damage has occurred, contact the carrier and file the appropriate freight claims. Do not contact the
factory, as the responsibility of shipping damage is between the carrier and the dealer or end-user.
CHAPTER 2: IMPORTANT INFORMATION
All electrical cooking appliances must be electrically connected and
.
electrical cooking equipment must be electrically
All
2-3