Copy Function - Fuji Xerox DocuPrint CM305 df User Manual

Copy Function

Type
Memory
HDD
Color Capability
Printing Resolution
Halftone/Printable Colors
Warm-up Time
Original Paper Size
Output Paper Size
Output Paper Weight
First Copy Output Time
Reduction/Enlargement
Continuous Copy Speed
Paper Tray Capacity
Console
256 MB (Maximum 768 MB)
—
Full color
Output resolution: 600 × 600 dpi
256 color gradation for each color (16,700,000 colors)
20 seconds or less*
*: The values are based on a room temperature of 22 °C and on the factory
default setting.
IMPORTANT:
• It may take longer due to the image quality adjustment.
Document glass: The maximum size is 215.9 × 297 mm for both
sheets and books.
Automatic document feeder (ADF): The maximum size is 215.9 ×
355.6 mm for sheets. Acceptable weight range is 50 to 125 gsm.
Maximum: Legal (8.5 × 14"), 215.9 × 355.6 mm
Minimum: Monarch
Image loss width: Top edge, 4 mm or less; bottom edge, 4 mm or
less; left and right edges, 4 mm or less
60 – 216 gsm
IMPORTANT:
• Use paper recommended by Fuji Xerox. Copying may not be
performed correctly depending on the conditions.
Monochrome: 21 seconds or less (for A4
mode)
Color: 30 seconds or less (for A4
Preset: 200%/141%/122%/100%/81%/70%/50%
Variable: 25% to 400% (Settable in 1% increments)
Monochrome:
A4 : 23 sheets/minute
Color:
A4 : 23 sheets/minute
IMPORTANT:
• The speed may be reduced due to image quality adjustment.
• The performance may be reduced depending on the paper type.
Standard:
250 sheets (Standard 250-sheet tray) + 1 sheet (Single sheet
feeder (SSF))
Maximum paper capacity:
501 sheets (standard + Optional 250-sheet feeder)
IMPORTANT:
• When using 80 gsm paper
/monochrome priority
/color priority mode)
Specifications 32